Hey guys,
I don't know how we got off on this tangent but I have no problem. I
was offering a possible solution to Fabio's weak description of his problem.
Due to the weak description I am unsure if I answered his problem or if his
problem is more like one that you have described but seem to be attributing
to some problem that I don't have.
In P99SE I always use absolute origin for both drills and gerbers, I
have never found a problem and the gerbers and drills always align.
Edi, in P99SE you can use either origin for both drills and gerbers,
both are set in the Other or Advanced tabs of the Gerber or Drill setup.
Brad Velander,
Lead PCB Designer,
Norsat International Inc.,
#300 - 4401 Still Creek Dr.,
Burnaby, B.C., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com
> -----Original Message-----
> From: Edi Im Hof [mailto:[EMAIL PROTECTED]]
> Sent: Friday, June 29, 2001 6:01 AM
> To: Protel EDA Forum
> Subject: Re: [PEDA] Problems generating CAM files
>
>
> The Gerber uses the absolute orgin, and the NC-Drill the user
> defined orgin!
> Protel should fix that (somewhat for the bug list?).
> Do as Mike says, reset the orgin bevor you do the cam.
>
> Edi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
