Hi Patrick,
What the guys tell you is true, the upgrade documentation is
overwhelming. But basicly you need to update (just check what you have
currently with show version) at least for a XMR:
LP=linecard
* Ironware (MP/LP)
* MP - boot
* MP - monitor
* MP - mbridge
* LP - boot
* LP - monitor
* LP - FPGA (dunno if you can already use the FPGA bundle, else you have
to know which modules like PBIF or XPP)
* do a reload-check until everything is fine :)
Once done it's not that hard :-)
- Gerwin
On 02/25/2011 10:59 PM, Patrick Henderson wrote:
Folks,
I can handle Cisco iOS upgrade. But now I am faced with upgrading iOS
on a Foundry MLX-8 from 3.8 to 5.1. I would appreciate if someone can
give me a few general steps on how to go about this. Thanks in advance.
-Pat
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Met vriendelijke groet / With kind regards,
Gerwin Krist
Technical Manager
Digitalus Webhosting
First-class Internet Webhosting
Web: http://www.digitalus.nl
E-mail: gerwin at digitalus.nl
Tel.: +31 (0) 598 630000
Fax: +31 (0) 598 631860
BOFH Wisdom:
Collapsed Backbone
***************************************************************************************
This message may contain information which is confidential or privileged. If
you are
not the intended recipient, please advise the sender immediately by reply
e-mail and
delete this message and any attachments without retaining a copy.
***************************************************************************************
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
