Hi Don I wish I could do that. It freezes when I right-click the image. I might get through 10 images fine and on the 11th it freezes, or it might freeze on the first. There seems no rhyme or reason - most all of them are 300dpi TIFFs in an \images folder, so some behave well and some misbehave. Another week and the crunch will be over - then I can try to track it down better. For now I am too exhausted to track an ornery bug.
> -----Original Message----- > From: Don Laux [mailto:Don.Laux at SolimarSystems.com] > Sent: Monday, November 28, 2005 6:49 PM > To: framers at lists.frameusers.com > Cc: John Sgammato > Subject: Freeze Frame when selecting Object Properties > > Hi John, > > I use a similar method for replacing screenshots: look at the Object > Properties of the existing screenshot to get the file name, etc., and then > replace the screenshot. > > I have also had Frame freeze during this process. It happens if the Object > Properties dialog box is still open when I overwrite the current image. In > other words, if I do the following: > > - Right-click the current image > - Open Object Properties > - Get the file name > - Switch immediately to SnagIt (without closing the Object Properties > dialog > box in Frame) > - Snap the replacement screenshot > - Save the replacement image in SnagIt to overwrite the original image > (same > file name/location) > > When I return to Frame it is locked up and must be restarted. > > If you are experiencing the same problem, just close that Object > Properties > dialog box in Frame before you overwrite the original image and you should > be OK. > > HTH, > -Don
