Drew, There is a similar way to use a table for Notes, Cautions, and Warnings that uses a 2-celled table. This is probably what Joe Malin referred to in his message. BTW, the credit for this method goes to Brad Anderson. I stole - I mean "researched" it from a template he gave me way back in 2000.
1. On the reference page, draw a reference frame about 6 inches wide and one inch high. Name the frame Warning. 2. In that frame, construct a 2-celled table with the left cell about 3/4 inch wide and the right cell the remaining width of the table. Display only the top and bottom borders of the table. In the Table Designer dialog box, name the table waWarning and set it to RIGHT aligned, with 5 or 6 pts above and below. Be sure to include the prefix wa in the name as shown here. If you want the table to look like a filled rectangle, display all ourside borders and set the table shading to whatever color and fill % you want. 3. Construct a 1/2 inch x 1/2 inch reference frame. Name it zWarning. In that frame, place the standard ANSI warning symbol and size it to fit the frame. 4. Click the paragraph tag in the left cell of the table. Create a new paragraph tag called zWarning. It does not matter what font you use, but set all the spacings to 0 and make the font size and leading as small as possible. In the advanced tab, set Frame Below to zWarning. 5. Click the para tag in the right cell of the table. Create a new para tag called waWarning and set it to whatever font you normally use for this. In the numbering tab enable autonumbering and set the value to "Warning!\t" Set the para's tab value to 0.6 in. In the Table Cell tab, set the Vertical Alignment to Middle. 6. Save. To place the table on a body page: 1. Create an empty paragraph mark where you want the table to be and keep your cursoe on that paragraph. 2. Select Table > Insert and type wa <enter>. Or type Esc-t-i-wa [Enter]. The 2-celled table, with the symbol and the autonum text drops onto the page. You can add text after the work Warning as needed. 3. Now, you will need to manually adjust the length of the right cell of the table on the REFERENCE page, so that when you place the table on the body page, that the word Warning is left aligned with the body text. Here is an example. Body text Body text Body text Don't anchor the table here.->P P _________________________________________________________________ | /\ | | / \ Warning! (User-entered additional text here.) | | /____\ | ------------------------------------------------------------------- If you want,I can send you an FM file with a set of tables for notes, caution, warning, and a few others all done and ready to use. Just import the reference page. Hope this helps. Diane ============================== -----Original Message----- From: framers-bounces+dgcaller=earthlink....@lists.frameusers.com [mailto:framers-bounces+dgcaller=earthlink.net at lists.frameusers.com]On Behalf Of Daniel Doornbos Sent: Wednesday, February 07, 2007 12:27 PM To: Knox Drew-KFP368; framers at lists.frameusers.com Subject: RE: Need help building a para Warning tag Hi Drew, I do something like what you described in my docs by creating a four-cell table for the warning message. The top left cell has an an imported graphic with the anchored frame set to Run Into Paragraph. The top and bottom left cells are straddled. The top right cell holds the heading (level of warning), centered in bold text. The bottom right cell holds the content in regular, left-aligned text. I apply custom rules to the bottom right (text) cell. The ruling you mentioned is applied in the Table Designer, Ruling tab, Outside Ruling box. I have these little tables already made up, so I can paste a warning into the text flow where I want it, then I add the appropriate text for the warning. The tables anchor to the paragraph above. HTH Daniel Doornbos Technical Writer Promise Technology, Inc. 408 228-1437 danield at promise.com -----Original Message----- From: framers-bounces+danield=promise....@lists.frameusers.com [mailto:framers-bounces+danield=promise.com at lists.frameusers.com] On Behalf Of Knox Drew-KFP368 Sent: Wednesday, February 07, 2007 8:41 AM To: framers at lists.frameusers.com Subject: Need help building a para Warning tag How do I build a paragraph tag that has the title "Warning," room for a para below, a graphic to the left vertically centered, and all of that bound by a filled rectangle? I put the word "Warning" into Numbering in the Paragraph Designer but can't recall how to include a return for the warning text nor how to include the warning graphic. I'm also stuck in properly referencing the bounding box. I built a filled rectangle on the Reference page but that comes in either above or below the word "Warning" instead of enclosing it. TIA, Drew Knox at Motorola in way too cold Horsham, PA _______________________________________________ You are currently subscribed to Framers as danield at promise.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/danield%40promise.co m Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. _______________________________________________ You are currently subscribed to Framers as dgcaller at earthlink.net. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/dgcaller%40earthlink.net Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.