[EMAIL PROTECTED] wrote: > http://wiki.openmoko.org/wiki/Gsmd#Usage_of_shell_mode
There's also the possibility to talk to the modem directly: /etc/init.d/gsmd stop echo 1 >/sys/bus/platform/devices/gta01-pm-gsm.0/power_on cu -E @ -l /dev/ttySAC0 Now you can enter AT commands. E.g., ATE1 AT+CFUN=1 AT+CPIN="1234" AT+COPS ATD123456789; Notes: - it's "normal" for CFUN=1 to produce an error - COPS often hangs, but returns OK when a character is sent - the semicolon at the end of ATD... is needed to make a voice call > results, but I'm reluctant to following the thread that powering up the > handset with no SIM card risks short circuits between the SIM pins and the > metal card frame.) Hmm, thinking of it, checking what actually happens when the SIM card gets shorted is probably still on the to do list of our hardware team. Phase 0 phones (GTA01Bv3) can be killed by shorting the microSD slot (this blows an inductor). Phase 1 and beyond (GTA01Bv4) should be immune to this (there is a current limiter and we also upgraded the inductor). - Werner -- _________________________________________________________________________ / Werner Almesberger, Buenos Aires, Argentina [EMAIL PROTECTED] / /_http://www.almesberger.net/____________________________________________/
