Dnia poniedziaĆek, 28 maja 2007, Werner Almesberger napisaĆ: > Now you can enter AT commands. E.g., > > ATE1
AT+CMEE=2 this will give extended error messages > AT+CFUN=1 here you can get: +CME ERROR: SIM PIN required message > AT+CPIN="1234" If PIN was needed then AT+CFUN=1 will be needed here too. > AT+COPS > ATD123456789; > Notes: > - it's "normal" for CFUN=1 to produce an error > - COPS often hangs, but returns OK when a character is sent > - the semicolon at the end of ATD... is needed to make a voice call My SE k750i handle both but give notice about type of call. http://blog.haerwu.biz/2007/05/29/how-to-check-does-gsm-modem-works/ -- JID: hrw-jabber.org OpenEmbedded developer/consultant I don't know what your problem is, but I'll bet it's hard to pronounce.