How about these Tegra3 boards? https://www.toradex.com/computer-on-modules/apalis-arm-family/nvidia-tegra-3
-- Johannes Lundberg BRILLIANTSERVICE CO., LTD. On Thu, Jan 29, 2015 at 9:36 AM, Ian Lepore <i...@freebsd.org> wrote: > On Thu, 2015-01-29 at 09:12 +0900, Lundberg, Johannes wrote: > > Ah now I see it has EDM connection. I didn't look carefully enough. All > the > > images are with the expansion board attached.. > > > > Spec-wise and portability-wise it seems like a good option but my > hardware > > guy keeps warning me about Freescale that they often have hardware bugs > and > > rather than fixing the bugs they pretend they are not there.. In other > > words, Freescale is good for software developers because of open > > documentation but not so for hardware manufactures. Any experiences with > > this? > > The imx6 manuals include an errata list, so it would be good to check > that for anything specific that would matter to your projects. > > For the devices we use in our products everything is good so far with > the hardware. That's emmc, sdcard, ethernet, i2c, uarts, usb, and lots > of gpio (inputs and outputs). The ethernet is gigabit but has a known > limitation of 40MB/s due to the bus it's connected to in the chip. (But > hey, it's documented so it's not a problem, right? :) > > You mentioned video, and we don't have that working on freebsd imx6 yet, > but there's not a ton of work to do. There's a framebuffer driver for > imx5 and it has pretty much the same framebuffer hardware. Getting > video output to a TTL LCD is probably just hours of work. Getting it to > an LVDS LCD or HDMI probably needs days of work (entire drivers written, > potentially, I haven't looked into it). > > Some audio support was recently committed, but I don't know much about > it yet. > > -- Ian > > > -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 秘密保持について：この電子メールは、名宛人に送信したものであり、秘匿特権の対象となる情報を含んでいます。 もし、名宛人以外の方が受信された場合、このメールの破棄、およびこのメールに関する一切の開示、 複写、配布、その他の利用、または記載内容に基づくいかなる行動もされないようお願い申し上げます。 --- CONFIDENTIALITY NOTE: The information in this email is confidential and intended solely for the addressee. Disclosure, copying, distribution or any other action of use of this email by person other than intended recipient, is prohibited. If you are not the intended recipient and have received this email in error, please destroy the original message. _______________________________________________ email@example.com mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"