I have a problem installing a Samsung CLX-2160 color
laser printer using CUPS. In the http://localhost:631
web-based configuration, none of the methods that are
supposed to be used for installing a printer works.
The "Add Printer" button leads to this:
Add Printer
-----------
Local Printers:
Discovered Network Printers:
Other Network Printers: o Internet Printing Protocol (http)
o Internet Printing Protocol (ipp)
o LPD/LPR Host or Printer
o AppSocket/HP JetDirect
[ Continue ]
No local printers can be selected (even though the
printer is connected, switched on and woken up).
And "Find New Printers" shows this:
Available Printers
------------------
No printers found.
Excellent auto detection. :-)
The corresponding device for the printer is this:
ulpt0: <Samsung Electronics Co., Ltd. CLX-216x Series,
class 0/0, rev 2.00/1.00, addr 2> on usbus4
ulpt0: using bi-directional mode
ugen4.2: <CLX-216x Series Samsung Electronics Co., Ltd.>
at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
crw-rw---- 1 root cups 0, 142 Feb 25 21:42 /dev/ulpt0
I have installed all packages I can imagine:
cups-1.4.6
cups-base-1.4.6_6
cups-client-1.4.6
cups-image-1.4.6
cups-pstoraster-8.15.4_6
gutenprint-cups-5.2.4_2
foo2zjs-20110609
foomatic-db-20090530_2
foomatic-db-engine-4.0.7,2
gutenprint-foomatic-5.2.4_2
foo2zjs-20110609
I also have the CLX-216xsplc.ppd PPD file available
which I think I'd like to hand over to CUPS somewhere.
ALTERNATIVE: If someone could explain how it's easier
to make a lpr filter (for the system's printer service),
I'd also appreciate this.
I've already tried this:
# foo2xqx-wrapper cupstest.ps > cupstest.xqx
# cat cupstest.xqx > /dev/ulpt0
It causes the LED of the printer to blink, but nothing is
printed, even though the printer startes to make sounds
(involving the print mechanism, but not the sheet feeder).
If I use
# foo2qpdl-wrapper cupstest.ps > cupstest.xqx
# cat cupstest.xqx > /dev/ulpt0
the CUPS test page is printed, but not in color (only b/w).
After looking into the manpage,
# foo2qpdl-wrapper -p 2 -c cupstest.ps > cupstest.xqx
# cat cupstest.xqx > /dev/ulpt0
makes the printer print properly.
Okay, it works.
How am I supposed to use a PPD file with CUPS when no
local printer is shown?
I "need" CUPS (or at least my programs seem to think
that), how should it be done?
Okay, I could make a simple printer filter. I could then
integrate that with /etc/printcap (as I do with my PCL
HP Laserjet 4000d). I think it should be possible to code
that similar to a parallel printer (with ulpt instead
of lpt device specification for the lp= parameter...
What am I doing wrong? :-)
--
Polytropon
Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
