On Tue, 2015-11-10 at 17:40 +0100, Hans Petter Selasky wrote:
> On 11/10/15 17:28, Burton Sampley wrote:
> > SYSFS{idVendor}=="2100", SYSFS{idProduct}=="9e56",
> > RUN+="/sbin/modprobe -q
> > ftdi_sio vendor=0x2100 product=0x9e56"
> > 
> > How do I accomplish the same in FreeBSD?  When the cable is plugged
> > in, I
> > get the following in /var/log/messages:
> 
> Hi,
> 
> See examples here:
> 
> https://svnweb.freebsd.org/ports/head/multimedia/webcamd/files/webcam
> d.conf.in?view=markup
> 
> --HPS

But the info in those examples won't cause the uftdi driver to attach
to the device (as shown in the linux-based example), that can only
happen if the vid/pid are added to the table in the driver itself,
right?  I don't remember any mechanism in our usb world for forcing a
driver to attach to a device that isn't compiled into the driver's
usb_device_id array.

On the other hand, if the device is going to be accessed via libusb
and/or libftdi, I'm not sure the tty driver needs to attach to it at
all; don't those libraries work purely through the ugen device?

-- Ian

_______________________________________________
freebsd-usb@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscr...@freebsd.org"

Reply via email to