木村と申します。 At 09:54 07/02/08, you wrote: >もしかすると、Chip は OEM ですから問題無いでしょうけど、BIOS で >返す自分の Device のモデルとかの関係上 > >Dell PERC 5ei > >が対応（検証）されないと辛いのかもしれません。
PowerEdge2950 でなくて PowerEdge1950 の Dell PERC5/i の例ですが、 FreeBSD6.2R で動作しています。MegaRAID 系ですがドライバは amr ではなく mfi です。 % dmesg | grep ^mfi mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 78 at device 14.0 on pci2 mfi0: 1546 (224221533s/0x0020/0) - Shutdown command received from host mfi0: 1547 (4278190080s/0x0020/0) - PCI 0x041028 0x0415 0x041028 0x041f03: Firmware initialization started (PCI ID 0015/1028/1f03/1028) mfi0: 1548 (4278190080s/0x0020/0) - Type 18: Firmware version 1.00.01-0088 mfi0: 1549 (4278190090s/0x0008/0) - Battery Present mfi0: 1550 (4278190107s/0x0004/0) - PD 08(e1/s255) event: Enclosure (SES) discovered on PD 08(e1/s255) mfi0: 1551 (4278190108s/0x0002/0) - PD 08(e1/s255) event: Inserted: PD 08(e1/s255) mfi0: 1552 (4278190108s/0x0002/0) - Type 29: Inserted: PD 08(e1/s255) Info: enclPd=08, scsiType=d, portMap=00, sasAddr=500180b03a123d00,0000000000000000 mfi0: 1553 (4278190108s/0x0002/0) - PD 00(e1/s0) event: Inserted: PD 00(e1/s0) mfi0: 1554 (4278190108s/0x0002/0) - Type 29: Inserted: PD 00(e1/s0) Info: enclPd=08, scsiType=0, portMap=01, sasAddr=1221000000000000,0000000000000000 mfi0: 1555 (4278190108s/0x0002/0) - PD 01(e1/s1) event: Inserted: PD 01(e1/s1) mfi0: 1556 (4278190108s/0x0002/0) - Type 29: Inserted: PD 01(e1/s1) Info: enclPd=08, scsiType=0, portMap=02, sasAddr=1221000001000000,0000000000000000 mfi0: 1557 (224222092s/0x0020/0) - Adapter ticks 224222092 elapsed 28s: Time established as 02/08/07 3:54:52; (28 seconds since power on) mfi0: 1558 (224222149s/0x0008/0) - Battery temperature is normal mfi0: 1559 (224222149s/0x0008/0) - Current capacity of the battery is above threshold mfid0: <MFI Logical Disk> on mfi0 mfid0: 237824MB (487063552 sectors) RAID volume 'Virtual Disk 0' is optimal --- 木村 孝雄 e-mail: [EMAIL PROTECTED],[EMAIL PROTECTED],[EMAIL PROTECTED]
