Hello, Adrian. You wrote 30 апреля 2013 г., 19:41:12: >> Warm-up: 120 seconds of TCP, throughput osculate between 50 and >> 100Mbit/, several BAR resets, no hangs. AC> Ok. But did it negotiate A-MPDU? I'm not sure. Both ends showed typical N speeds (Windows in connection properties, FreeBSD in "list sta").
AC> It's fine. We'll worry about aggregation later. Yep. AC> So here we go: AC> Apr 30 12:21:26 gateway kernel: ath0: ath_stoptxdma: tx queue [9] AC> 0xd8c3000, link 0 AC> Apr 30 12:21:26 gateway kernel: ath0: ath_tx_stopdma: tx queue [0] 0, AC> active=0, hwpending=0, flags 0x00000000, link 0 AC> Apr 30 12:21:26 gateway kernel: ath0: ath_tx_stopdma: tx queue [1] AC> 0xc720ed00, active=0, hwpending=0, flags 0x00000000, link 0 AC> Apr 30 12:21:26 gateway kernel: ath0: ath_tx_stopdma: tx queue [2] 0, AC> active=0, hwpending=0, flags 0x00000000, link 0 AC> Apr 30 12:21:26 gateway kernel: ath0: ath_tx_stopdma: tx queue [3] AC> 0xd8bec00, active=0, hwpending=0, flags 0x00000000, link 0 AC> Apr 30 12:21:26 gateway kernel: ath0: ath_tx_stopdma: tx queue [8] AC> 0xc720d2c0, active=0, hwpending=0, flags 0x00000000, link 0 AC> Notice how the hardware queue isn't active at all. There's frames in AC> the TXQ and the hardware points to the next frame to transmit (but you AC> didn't provide the whole list of frames that were in the TXQ, so I'm AC> going on what it said before.) I've provided everything I've had in log :) -- // Black Lion AKA Lev Serebryakov <[email protected]> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
