tcpdump -ni wlan0 -y IEEE802_11_RADIO -l -v -w pcap.out
-a On 6 January 2014 07:17, Alexandr <[email protected]> wrote: > It's TP-Link TL-MR3420 rev.1. > > How can I capture a dump? AP has no such tools and it logs is clean. Can > I do it from my bsd? > > 06.01.2014 17:08, Adrian Chadd пишет: >> Which AP is it? >> >> I kinda want to see a packet dump of the negotiation exchange. I'm >> worried that your AP is deciding to kick you off because you don't >> meet some minimum rate selection or something. >> >> -a >> >> On 6 January 2014 07:07, Alexandr <[email protected]> wrote: >>> Yes, just now it works in 11n-only. But I tried switch it to bgn-mixed, >>> g-only, n-only - no luck. >>> >>> /var/log/dmesg.today: >>> >>> wlan0: [54:e6:fc:e4:48:c4] recv auth frame with algorithm 0 seq 2 >>> wlan0: link state changed to UP >>> wlan0: [54:e6:fc:e4:48:c4] recv deauthenticate (reason 2) >>> wlan0: link state changed to DOWN >>> >>> /var/log/messages: >>> >>> Jan 6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Trying to >>> associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz) >>> Jan 6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Associated with >>> 54:e6:fc:e4:48:c4 >>> Jan 6 17:05:06 thinkpad wpa_supplicant[27113]: wlan0: >>> CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0 >>> Jan 6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Trying to >>> associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz) >>> Jan 6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Associated with >>> 54:e6:fc:e4:48:c4 >>> Jan 6 17:05:20 thinkpad wpa_supplicant[27113]: wlan0: >>> CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0 >>> >>> 06.01.2014 16:56, Adrian Chadd пишет: >>>> .. and is the AP locked down to 11n only or something? >>>> >>>> >>>> -a >>>> >>>> On 6 January 2014 06:55, Adrian Chadd <[email protected]> wrote: >>>>> Whta's logged in dmesg? >>>>> >>>>> >>>>> -a >>>>> >>>>> On 6 January 2014 06:53, Alexandr <[email protected]> wrote: >>>>>> Ок, I changed key to "secretsecretsecret", the same error - WPA: 4-Way >>>>>> Handshake failed - pre-shared key may be incorrect. >>>>>> >>>>>> <3>Trying to associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz) >>>>>> <3>Associated with 54:e6:fc:e4:48:c4 >>>>>> <3>CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0 >>>>>> <3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect >>>>>> <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="door" auth_failures=8 >>>>>> duration=30 >>>>>> >>>>>> But it successfully connects to my android phone: >>>>>> >>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu >>>>>> 1500 >>>>>> ether 68:5d:43:92:3a:88 >>>>>> inet 192.168.1.227 netmask 0xffffff00 broadcast 192.168.1.255 >>>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>>>>> media: IEEE 802.11 Wireless Ethernet MCS mode 11ng >>>>>> status: associated >>>>>> ssid htc channel 6 (2437 MHz 11g ht/20) bssid 84:7a:88:c9:25:ce >>>>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF >>>>>> AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 60 bgscan >>>>>> bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode >>>>>> CTS >>>>>> ampdulimit 16k -amsdutx amsdurx shortgi wme roaming MANUAL >>>>>> >>>>>> >>>>>> May be it AP-related problem? But why other devices works (laptop with >>>>>> opensuse and different android devices) >>>>>> >>>>>> 06.01.2014 16:43, Adrian Chadd пишет: >>>>>>> You still need a longer password, psk isn't WPA long. Try >>>>>>> secretsecretsecret. >>>>>>> >>>>>>> >>>>>>> -a >>>>>>> >>>>>>> On 6 January 2014 06:28, Alexandr <[email protected]> wrote: >>>>>>>> I simply changed key in this listing to "secret". Yes, I tried a very >>>>>>>> simple configuration, no luck: >>>>>>>> >>>>>>>> network={ >>>>>>>> ssid="door" >>>>>>>> psk="secret" >>>>>>>> } >>>>>>>> >>>>>>>> >>>>>>>> 06.01.2014 16:24, Adrian Chadd пишет: >>>>>>>>> The passphrase 'secret' is too short for WPA. >>>>>>>>> >>>>>>>>> I gather it's not _that_, but is it long enough to meet WPA >>>>>>>>> reuirements? >>>>>>>>> >>>>>>>>> Have you tried removing the proto= and bssid lines? You don't strictly >>>>>>>>> need them. >>>>>>>>> >>>>>>>>> Thanks! >>>>>>>>> >>>>>>>>> -a >>>>>>>>> >>>>>>>>> >>>>>>>>> On 6 January 2014 06:00, Alexandr <[email protected]> wrote: >>>>>>>>>> Hello, >>>>>>>>>> >>>>>>>>>> I recently upgraded system on my laptop to current with a hope to >>>>>>>>>> get my >>>>>>>>>> wireless card working. Now it successfully recognized by kernel: >>>>>>>>>> >>>>>>>>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq >>>>>>>>>> 17 >>>>>>>>>> at device 0.0 on pci3 >>>>>>>>>> >>>>>>>>>> Unfortunately, I can't connect to my home access point: >>>>>>>>>> >>>>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED >>>>>>>>>> bssid=54:e6:fc:e4:48:c4 reason=0 >>>>>>>>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared >>>>>>>>>> key >>>>>>>>>> may be incorrect >>>>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 >>>>>>>>>> ssid="door" auth_failures=10 duration=30 >>>>>>>>>> >>>>>>>>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless >>>>>>>>>> modes, radio channels on my access point, the same error. >>>>>>>>>> >>>>>>>>>> # ifconfig wlan0 >>>>>>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 >>>>>>>>>> mtu 1500 >>>>>>>>>> ether 68:5d:43:92:3a:88 >>>>>>>>>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>>>>>>>>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >>>>>>>>>> status: no carrier >>>>>>>>>> ssid door channel 1 (2412 MHz 11g ht/40+) >>>>>>>>>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF >>>>>>>>>> txpower 13 >>>>>>>>>> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 >>>>>>>>>> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx >>>>>>>>>> amsdurx >>>>>>>>>> shortgi wme roaming MANUAL >>>>>>>>>> >>>>>>>>>> /etc/wpa_supplicant.conf: >>>>>>>>>> >>>>>>>>>> ctrl_interface=/var/run/wpa_supplicant >>>>>>>>>> ctrl_interface_group=wheel >>>>>>>>>> eapol_version=2 >>>>>>>>>> >>>>>>>>>> network={ >>>>>>>>>> ssid="door" >>>>>>>>>> bssid=54:e6:fc:e4:48:c4 >>>>>>>>>> key_mgmt=WPA-PSK >>>>>>>>>> proto=WPA RSN >>>>>>>>>> psk="secret" >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Other home devices connets to AP without problems. Can you point me >>>>>>>>>> how >>>>>>>>>> I can debug it? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> _______________________________________________ >>>>>>>>>> [email protected] mailing list >>>>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>>>>>>>>> To unsubscribe, send any mail to >>>>>>>>>> "[email protected]" > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
