On 06.01.2014 15:28, Alexandr wrote:
> I simply changed key in this listing to "secret". Yes, I tried a very
> simple configuration, no luck:
>
> network={
> ssid="door"
> psk="secret"
> }
Try using wpa_passphrase:
man wpa_passphrase.
It should create correct psk.> > 06.01.2014 16:24, Adrian Chadd пишет: >> The passphrase 'secret' is too short for WPA. >> >> I gather it's not _that_, but is it long enough to meet WPA reuirements? >> >> Have you tried removing the proto= and bssid lines? You don't strictly >> need them. >> >> Thanks! >> >> -a >> >> >> On 6 January 2014 06:00, Alexandr <[email protected]> wrote: >>> Hello, >>> >>> I recently upgraded system on my laptop to current with a hope to get my >>> wireless card working. Now it successfully recognized by kernel: >>> >>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq 17 >>> at device 0.0 on pci3 >>> >>> Unfortunately, I can't connect to my home access point: >>> >>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED >>> bssid=54:e6:fc:e4:48:c4 reason=0 >>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared key >>> may be incorrect >>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 >>> ssid="door" auth_failures=10 duration=30 >>> >>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless >>> modes, radio channels on my access point, the same error. >>> >>> # ifconfig wlan0 >>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 >>> ether 68:5d:43:92:3a:88 >>> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >>> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) >>> status: no carrier >>> ssid door channel 1 (2412 MHz 11g ht/40+) >>> country US authmode WPA2/802.11i privacy ON deftxkey UNDEF >>> txpower 13 >>> bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 >>> roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx amsdurx >>> shortgi wme roaming MANUAL >>> >>> /etc/wpa_supplicant.conf: >>> >>> ctrl_interface=/var/run/wpa_supplicant >>> ctrl_interface_group=wheel >>> eapol_version=2 >>> >>> network={ >>> ssid="door" >>> bssid=54:e6:fc:e4:48:c4 >>> key_mgmt=WPA-PSK >>> proto=WPA RSN >>> psk="secret" >>> } >>> >>> >>> Other home devices connets to AP without problems. Can you point me how >>> I can debug it? >>> >>> >>> >>> _______________________________________________ >>> [email protected] mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless >>> To unsubscribe, send any mail to "[email protected]" > _______________________________________________ > [email protected] mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "[email protected]" -- Pozdrawiam, Maciej Milewski _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "[email protected]"
