Attached

06.01.2014 18:00, Adrian Chadd пишет:
> tcpdump -ni wlan0 -y IEEE802_11_RADIO -l -v -w pcap.out
>
>
> -a
>
> On 6 January 2014 07:17, Alexandr <shur...@shurik.kiev.ua> wrote:
>> It's  TP-Link TL-MR3420 rev.1.
>>
>> How can I capture a dump? AP has no such tools and it logs is clean. Can
>> I do it from my bsd?
>>
>> 06.01.2014 17:08, Adrian Chadd пишет:
>>> Which AP is it?
>>>
>>> I kinda want to see a packet dump of the negotiation exchange. I'm
>>> worried that your AP is deciding to kick you off because you don't
>>> meet some minimum rate selection or something.
>>>
>>> -a
>>>
>>> On 6 January 2014 07:07, Alexandr <shur...@shurik.kiev.ua> wrote:
>>>> Yes, just now it works in 11n-only. But I tried switch it to bgn-mixed,
>>>> g-only, n-only - no luck.
>>>>
>>>> /var/log/dmesg.today:
>>>>
>>>> wlan0: [54:e6:fc:e4:48:c4] recv auth frame with algorithm 0 seq 2
>>>> wlan0: link state changed to UP
>>>> wlan0: [54:e6:fc:e4:48:c4] recv deauthenticate (reason 2)
>>>> wlan0: link state changed to DOWN
>>>>
>>>> /var/log/messages:
>>>>
>>>> Jan  6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Trying to
>>>> associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
>>>> Jan  6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Associated with
>>>> 54:e6:fc:e4:48:c4
>>>> Jan  6 17:05:06 thinkpad wpa_supplicant[27113]: wlan0:
>>>> CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>>>> Jan  6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Trying to
>>>> associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
>>>> Jan  6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Associated with
>>>> 54:e6:fc:e4:48:c4
>>>> Jan  6 17:05:20 thinkpad wpa_supplicant[27113]: wlan0:
>>>> CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>>>>
>>>> 06.01.2014 16:56, Adrian Chadd пишет:
>>>>> .. and is the AP locked down to 11n only or something?
>>>>>
>>>>>
>>>>> -a
>>>>>
>>>>> On 6 January 2014 06:55, Adrian Chadd <adr...@freebsd.org> wrote:
>>>>>> Whta's logged in dmesg?
>>>>>>
>>>>>>
>>>>>> -a
>>>>>>
>>>>>> On 6 January 2014 06:53, Alexandr <shur...@shurik.kiev.ua> wrote:
>>>>>>> Ок, I changed key to "secretsecretsecret", the same error - WPA: 4-Way
>>>>>>> Handshake failed - pre-shared key may be incorrect.
>>>>>>>
>>>>>>> <3>Trying to associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 
>>>>>>> MHz)
>>>>>>> <3>Associated with 54:e6:fc:e4:48:c4
>>>>>>> <3>CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>>>>>>> <3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect
>>>>>>> <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="door" auth_failures=8
>>>>>>> duration=30
>>>>>>>
>>>>>>> But it successfully connects to my android phone:
>>>>>>>
>>>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 
>>>>>>> 1500
>>>>>>>         ether 68:5d:43:92:3a:88
>>>>>>>         inet 192.168.1.227 netmask 0xffffff00 broadcast 192.168.1.255
>>>>>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>>         media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
>>>>>>>         status: associated
>>>>>>>         ssid htc channel 6 (2437 MHz 11g ht/20) bssid 84:7a:88:c9:25:ce
>>>>>>>         country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>>>>>         AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 60 bgscan
>>>>>>>         bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 
>>>>>>> protmode CTS
>>>>>>>         ampdulimit 16k -amsdutx amsdurx shortgi wme roaming MANUAL
>>>>>>>
>>>>>>>
>>>>>>> May be it AP-related problem? But why other devices works (laptop with
>>>>>>> opensuse and different android devices)
>>>>>>>
>>>>>>> 06.01.2014 16:43, Adrian Chadd пишет:
>>>>>>>> You still need a longer password, psk isn't WPA long. Try 
>>>>>>>> secretsecretsecret.
>>>>>>>>
>>>>>>>>
>>>>>>>> -a
>>>>>>>>
>>>>>>>> On 6 January 2014 06:28, Alexandr <shur...@shurik.kiev.ua> wrote:
>>>>>>>>> I simply changed key in this listing to "secret". Yes, I tried a very
>>>>>>>>> simple configuration, no luck:
>>>>>>>>>
>>>>>>>>> network={
>>>>>>>>> ssid="door"
>>>>>>>>> psk="secret"
>>>>>>>>> }
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 06.01.2014 16:24, Adrian Chadd пишет:
>>>>>>>>>> The passphrase 'secret' is too short for WPA.
>>>>>>>>>>
>>>>>>>>>> I gather it's not _that_, but is it long enough to meet WPA 
>>>>>>>>>> reuirements?
>>>>>>>>>>
>>>>>>>>>> Have you tried removing the proto= and bssid lines? You don't 
>>>>>>>>>> strictly
>>>>>>>>>> need them.
>>>>>>>>>>
>>>>>>>>>> Thanks!
>>>>>>>>>>
>>>>>>>>>> -a
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 6 January 2014 06:00, Alexandr <shur...@shurik.kiev.ua> wrote:
>>>>>>>>>>> Hello,
>>>>>>>>>>>
>>>>>>>>>>> I recently upgraded system on my laptop to current with a hope to 
>>>>>>>>>>> get my
>>>>>>>>>>> wireless card working. Now it successfully recognized by kernel:
>>>>>>>>>>>
>>>>>>>>>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff 
>>>>>>>>>>> irq 17
>>>>>>>>>>> at device 0.0 on pci3
>>>>>>>>>>>
>>>>>>>>>>> Unfortunately, I can't connect to my home access point:
>>>>>>>>>>>
>>>>>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED
>>>>>>>>>>> bssid=54:e6:fc:e4:48:c4 reason=0
>>>>>>>>>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - 
>>>>>>>>>>> pre-shared key
>>>>>>>>>>> may be incorrect
>>>>>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0
>>>>>>>>>>> ssid="door" auth_failures=10 duration=30
>>>>>>>>>>>
>>>>>>>>>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless
>>>>>>>>>>> modes, radio channels on my access point, the same error.
>>>>>>>>>>>
>>>>>>>>>>> # ifconfig wlan0
>>>>>>>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 
>>>>>>>>>>> mtu 1500
>>>>>>>>>>>         ether 68:5d:43:92:3a:88
>>>>>>>>>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>>>>>>         media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>>>>>>>>>         status: no carrier
>>>>>>>>>>>         ssid door channel 1 (2412 MHz 11g ht/40+)
>>>>>>>>>>>         country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>>>>>>>>> txpower 13
>>>>>>>>>>>         bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
>>>>>>>>>>>         roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k 
>>>>>>>>>>> -amsdutx amsdurx
>>>>>>>>>>>         shortgi wme roaming MANUAL
>>>>>>>>>>>
>>>>>>>>>>> /etc/wpa_supplicant.conf:
>>>>>>>>>>>
>>>>>>>>>>>         ctrl_interface=/var/run/wpa_supplicant
>>>>>>>>>>>         ctrl_interface_group=wheel
>>>>>>>>>>>         eapol_version=2
>>>>>>>>>>>
>>>>>>>>>>> network={
>>>>>>>>>>>         ssid="door"
>>>>>>>>>>>         bssid=54:e6:fc:e4:48:c4
>>>>>>>>>>>         key_mgmt=WPA-PSK
>>>>>>>>>>>         proto=WPA RSN
>>>>>>>>>>>         psk="secret"
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Other home devices connets to AP without problems. Can you point me 
>>>>>>>>>>> how
>>>>>>>>>>> I can debug it?
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> freebsd-wireless@freebsd.org mailing list
>>>>>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>>>>>>>> To unsubscribe, send any mail to 
>>>>>>>>>>> "freebsd-wireless-unsubscr...@freebsd.org"

_______________________________________________
freebsd-wireless@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"

Reply via email to