> the Dawicontrol DC-154 PCI SATA RAID card. > Surprisingly, it says that this low end > controller supports RAID 5 - and MS DOS!
> Up to 4 disks, SATA/150, Sil3114 chip... > Can use LBA48 and 33 and 66 MHz PCI bus. > RAID 0, 1, 0+1, 5, JBOD, with flash BIOS > Can anybody confirm this? Or does this > controller only support simpler RAID > levels when used in MS DOS / FreeDOS? virtually ALL SCSI/RAID adapters support DOS. Background: when booting a computer, the BIOS accesses the drive(s) using interrupt 13. That's good enough to boot, good enough for DOS, and good enough for some disk imagers ;) only exception are some (looooow cost) adapters without onboard BIOS. Tom ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Freedos-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freedos-user
