I personnally use post-auth sections of each of my virtual server to
send diffrenet attributes.
I find It to be very clean way to achieve this.
regards
Le 08/10/2011 20:02, Wegener, Norbert a écrit :
The general idea is to setup a virtual server for each type of NAS and
make sure, that every NAS is loaded into the correct virtual server.
With best regards,
------------------------------------------------------------------------
Norbert Wegener
Siemens IT Solutions and Services
AIS MS NC PSU SDC
Bruchstraße 5
45883 Gelsenkirchen, Germany
Tel.: +49 (209) 94565716
Fax: +49 (201) 8165581284
mailto:norbert.wege...@atos.net
Atos IT Solutions and Services GmbH; Geschäftsführung: Winfried Holz,
Christian Oecking, Rainer-Christian Koppitz; Vorsitzender des
Aufsichtsrats: Charles Dehelly; Sitz der Gesellschaft: München,
Deutschland; Registergericht: München, HRB 184933.
------------------------------------------------------------------------
*Von:*
freeradius-users-bounces+norbert.wegener=atos....@lists.freeradius.org
[freeradius-users-bounces+norbert.wegener=atos....@lists.freeradius.org]"
im Auftrag von "Suman Dash [sumand...@gmail.com]
*Gesendet:* Samstag, 8. Oktober 2011 16:39
*Bis:* FreeRadius users mailing list
*Betreff:* Dynamic Attributes Based on NAS Type !
Hi Everyone ... Currently i am planning to integrate freeradius with
different NAS like Chillispot , Cisco etc and enable roaming users so
that they can log in from any of the NAS.
As the reply items are different with different NAS , i am looking for
ideas how to enable a single user to roam and connect from different NAS.
In my case i think static reply items are not possible per user wise
or per groupwise so my question is what trick can be used to achieve
the same.
I had not tried anything as i have no clue on the same so some
highlights on the approach will be a good starting point for me.
Cheers
Suman
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
<http://www.horoa.net>
Alexandre Chapellon
Ingénierie des systèmes open sources et réseaux.
Follow me on twitter: @alxgomz <http://www.twitter.com/alxgomz>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html