I would like to have some insight in using virtual servers. But I am really stuck at the point that if i use virtual server how will be the DB entry look like i.e radreply / radgroup reply ?
As far i understand , the reply attributes with value should be available in the reply table which matches to those of the NAS. Regards Suman On Sun, Oct 9, 2011 at 4:32 PM, Alexandre Chapellon <[email protected]>wrote: > I personnally use post-auth sections of each of my virtual server to send > diffrenet attributes. > I find It to be very clean way to achieve this. > > regards > > Le 08/10/2011 20:02, Wegener, Norbert a écrit : > >> The general idea is to setup a virtual server for each type of NAS and >> make sure, that every NAS is loaded into the correct virtual server. >> >> With best regards, >> >> ------------------------------**------------------------------** >> ------------ >> >> Norbert Wegener >> Siemens IT Solutions and Services >> AIS MS NC PSU SDC >> Bruchstraße 5 >> 45883 Gelsenkirchen, Germany >> Tel.: +49 (209) 94565716 >> Fax: +49 (201) 8165581284 >> mailto:norbert.wegener@atos.**net <[email protected]> >> >> >> Atos IT Solutions and Services GmbH; Geschäftsführung: Winfried Holz, >> Christian Oecking, Rainer-Christian Koppitz; Vorsitzender des Aufsichtsrats: >> Charles Dehelly; Sitz der Gesellschaft: München, Deutschland; >> Registergericht: München, HRB 184933. >> ------------------------------**------------------------------** >> ------------ >> *Von:* freeradius-users-bounces+**norbert.wegener=atos.net@** >> lists.freeradius.org >> <[email protected]>[freeradius-users-bounces+ >> **norbert.wegener=atos.net@**lists.freeradius.org<[email protected]>]" >> im Auftrag von "Suman Dash [[email protected]] >> *Gesendet:* Samstag, 8. Oktober 2011 16:39 >> *Bis:* FreeRadius users mailing list >> *Betreff:* Dynamic Attributes Based on NAS Type ! >> >> >> Hi Everyone ... Currently i am planning to integrate freeradius with >> different NAS like Chillispot , Cisco etc and enable roaming users so that >> they can log in from any of the NAS. >> >> As the reply items are different with different NAS , i am looking for >> ideas how to enable a single user to roam and connect from different NAS. >> >> In my case i think static reply items are not possible per user wise or >> per groupwise so my question is what trick can be used to achieve the same. >> >> I had not tried anything as i have no clue on the same so some highlights >> on the approach will be a good starting point for me. >> >> Cheers >> Suman >> >> >> >> >> - >> List info/subscribe/unsubscribe? See http://www.freeradius.org/** >> list/users.html <http://www.freeradius.org/list/users.html> >> > > -- > <http://www.horoa.net> > > Alexandre Chapellon > > Ingénierie des systèmes open sources et réseaux. > Follow me on twitter: @alxgomz > <http://www.twitter.com/**alxgomz<http://www.twitter.com/alxgomz> > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/** > list/users.html <http://www.freeradius.org/list/users.html> >
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
