Hi Adrian, Your "umurmur" requires package PolarSSL. This is superseded by Mbed TLS.
But all the function names are different. Not easy. Alan VK2ZIW On Sun, 20 Oct 2019 16:57:58 +0300, Adrian Musceac wrote > Alan, > > Use this version of umurmur: https://github.com/qradiolink/umurmur > It is slightly older but verified to work with qradiolink. The Murmur server > is more complicated and has some compatibility issues that I didn't solve yet. > If you use the headless remote interface, you will need to set everything up > for repeater mode either in the settings file before starting the program, or > via telnet commands (squelch, volume, tx and rx gain, tx shift, VOIP gain, > duplex mode, frequency, CTCSS, etc). Then, you only need to issue "start_trx" > and "setrepeater 1". If you have two computers and want to link two > repeaters, you will need two full duplex SDRs like the PlutoSDR or > LimeSDR-mini to work in repeater mode. The HackRF is not full duplex. If you > don't want them as repeaters but simply radios linked by VOIP, then you can > use HackRFs just fine but make sure not to enable duplex mode in qradiolink. > For repeater mode, you can have an RTL-SDR for receiving and a HackRF for > transmitting and a single qradiolink instance on a single computer configured > to use both. I don't have a HackRF so I was not able to test it. I'm curious > whether it works well, please let me know. > If you use non-linear amplifiers with the HackRF, there are two 2FSK modes > which support both Codec2 (2FSK-2K) and Opus (2FSK-10K), as well as 800XA. > 2400A is not yet added. > > Cheers, > Adrian > > On Sun, Oct 20, 2019 at 4:22 PM Al Beard <bear...@unixservice.com.au> wrote: > > > Hi Adrian, > > > Yes, I was thinking of split sites, a computer at each end > > > I'll investigate mumble and murmur as they are standard packages on the > Fedora 29 here. > > > Alan VK2ZIW > > On Sun, 20 Oct 2019 11:22:20 +0000, Adrian Musceac wrote > > Alan, > > > > If you only want a cross-band repeater you don't need umurmur. That is for > > connecting repeaters or radios over the internet. Just enable TX and RX in > > qradiolink, set the TX shift in kHz and then enable the repeater. You can > > use two separate devices in qradiolink. > > > > Adrian > > > > On October 20, 2019 8:23:31 AM UTC, Al Beard <bear...@unixservice.com.au> > > wrote:Hi Adrian and David, > > > > > > Noting the Mumble protocol and looking for a server, I found uMurmur on > > github > > and tried to compile it on my Fedora 29 x86_64 here but am lost in cmake > > finding > > the SDL library. > > > > > > To make a cross band codec2 to FM repeater, can you give a quick run down > > using your software? > > > > > > Alan VK2ZIW > > > > > > > > > > On Thu, 17 Oct 2019 22:44:01 +0300, Adrian Musceac wrote > > > Hi David, > > > > > > Wow Adrian it's really coming along quickly! Well done :-) Combined > > > with the latest crop of duplex SDRs, I can see this work opening up > > > experimentation in the VHF/UHF bands. > > > > > > > > > Thanks! I've been working full time on this in the last month due to a > > > break at work that might end pretty soon. > > > I'm aiming at VHF to SHF work, small, portable and field configurable > > > repeaters (check out the LimeNet-micro and LimeRFE) > > > and satellite ops. The IP radio modem in qradiolink might also help point > > > to point IP link connectivity at low bandwidths but it needs more > > > improvement. > > > > > > HF is not out of the question but due to QTH conditions can't really use > > > it. > > > Telemetry modems (even direct sequence spread spectrum for very low > > > bitrates, like LoRa) and multi-channel repeaters are the next stop > > > (after release 1.0). > > > > > > Some thoughts: > > > > > > 1/ Codec 2 2400A and 2400B were designed to work on VHF/UHF, and 2400A > > > to substantially outperform FM and current digital voice systems at low > > > SNRs: > > > > > > http://www.rowetel.com/wordpress/?p=5219 > > > > > > They're in the FreeDV API already > > > > > > > > > I'll add 2400A for sure. I don't really see a reason to use 2400B with > > > SDRs. Maybe for testing purposes only with the FM modulator. > > > > > > But right now my plate is pretty full trying to test everything already > > > in and do some packaging. > > > The 700D modem segfaults in the LDPC encoder with the version of > > > libcodec2 in Debian stable and I didn't even have time to raise a bug > > > with them. > > > But I'll add it as well once that's figured out. By the way, can I > > > suggest for libcodec2 Git tags for stable releases? I could not find any > > > tags in Github and they would be pretty useful as landmarks. > > > > > > 2/ Have you done any BER versus SNR (Eb/No) tests to evaluate the > > > performance of the modems you are using, e.g. comparing performance to > > > theoretical? We have found many existing VHF/UHF digital voice systems > > > have modems that perform poorly. Gains of 10dB are possible with the > > > right modem/waveform design. > > > > > > > > > Yes. All tests are good. My custom modems are nothing original, they are > > > based on the knowledge of the GNU radio community, especially Daniel > > > Estevez and Marcus Mueller but also others. > > > > > > Some problems occur with some modems like the DQPSK written by me used > > > with both Opus and Codec2 > > > due to some implementation misconfigures. The Doppler correction used for > > > them tends to interact badly with the rest. > > > I'll fix that eventually. > > > > > > But the FreeDV modems work very well. All numbers check out exactly as > > > you described in your website. > > > > > > 3/ RpiTx would be an interesting option for the TX side: > > > > > > https://github.com/F5OEO/rpitx > > > > > > > > > RPiTx is a work of art, but it has some annoyances. It requires a PGA in > > > front to set the output power (some amplifiers > > > drive from below 0 dBm). The signals are not exactly clean, but the main > > > downside is the limited frequency range. > > > I do SHF (2.4 GHz and 5 GHz) with the PlutoSDR. Options to go all the way > > > up to 10 GHz with some other MyriadRF hardware. > > > > > > There's the https://osmocom.org/projects/osmo-fl2k/wiki project which > > > gives you a very cheap SDR transmitter as well but with the same > > > limitations. > > > > > > Best regards, > > > Adrian > > > > > > Cheers, > > > David > > > > > > On 17/10/19 10:30 pm, Adrian Musceac wrote: > > > > Hi, > > > > I made some more progress working on my application[1]. > > > > First of all, it is now possible to run it headless (maybe even > > > > daemonized) and control it remotely using a telnet client. > > > > Second, I have added support for mixed mode repeater (Codec2/FM or > > > > viceversa or any combination of modes like wideband > > > > Opus/Codec2/FreeDV/SSB etc.). > > > > > > > > The repeater can be connected to a VOIP server using the low latency > > > > Mumble voice protocol (known especially for high-performance gaming). So > > > > it is possible now to connect multiple repeaters together by putting > > > > them on the same VOIP channel (this can be controlled via telnet as > > > > well, although it's stil work in progress). They operate in full duplex > > > > mode, so a VOIP user can talk at the same time as a radio user and the > > > > two audio streams will be mixed together and broadcast. The > > > > FreeDV/Codec2 radio frames are transcoded to Opus at very high bitrates > > > > (~48 kbit/s) for VOIP transport. This may cause some small delays. > > > > > > > > I haven't really had time to test the cross-mode repeater so could use > > > > some help there from interested parties. > > > > > > > > [1] http://qradiolink.org > > > > > > > > Cheers, > > > > Adrian > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Freetel-codec2 mailing list > > > > Freetel-codec2@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > > > > > > > > _______________________________________________ > > > Freetel-codec2 mailing list > > > Freetel-codec2@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > > > > > > > --------------------------------------------------- > > Alan Beard > > > > OpenWebMail 2.53 > > > > > > --------------------------------------------------- > Alan Beard > > OpenWebMail 2.53 > > _______________________________________________ > Freetel-codec2 mailing list > Freetel-codec2@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > --------------------------------------------------- Alan Beard OpenWebMail 2.53
_______________________________________________ Freetel-codec2 mailing list Freetel-codec2@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freetel-codec2
