After falling in love with Freevo, and reading the recommended hardware, I
bought myself a PVR-350 and a Matrox G400 for the machine I was using as a
file server.
Been trying to get freevo to work ever since !!
The problem isn't as much Freevo as the G400.
After reading up, I decided to go with the framebuffer mode. Tried to
follow instructions here and there, but nothing seems to work.
The point I'm at right now is that matrox-maven can't find
/proc/bus/i2c seeing as kernel 2.6.10 has moved to sysfs.
I've read at a couple of place and couple of Howto's about patches to get
this and that to work on the G400, but nothing seems to refer to the 2.4
kernel.
Does anyone have the G400 running in framebuffer on 2.6 ?
Since the G400 is the recommended hardware for freevo, how does everyone
else have it setup?
I'd obviously like to stay with kernel 2.6 and not go back to 2.4 if it is
at all possible.
Thanks for your help
P.S. Machine is a gentoo kernel-2.6.10 running on a Apollo Pro 133
chipseet
--
\\\|///
\\ - - //
( @ @ )
---oOOo-(_)-oOOo-------------------------------
We should be careful to get out of an experience only the wisdom that is
in it - and stay there, lest we be like the cat that sits down on a hot
stove-lid. She will never sit down on a hot stove-lid again - and that
is well; but also she will never sit down on a cold one any more.
-- Mark Twain
--------------Oooo-----------------------------
oooO ( ) Benjamin Benthos Lawetz
( ) ) / mailto:[EMAIL PROTECTED]
\ ( (_/ ICQ# 4269530
\_)
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
