Dear friends, thanks for partitioning my thorrows :-)
My first problem could be solved: It was indeed the replaced CPU not sitting firmly in its place. After removing and fixing it again the Pismo is booting in both systems without issues. But the heat became a problem. That's reason for this thread. And as I believe the reason is not or no longer the CPU or heatsink with heatpipe not to be fixed as it should be. It might be only a defect CPU or demanding aspects of OS-X (or OS-X applications). I don't believe a defect CPU would boot or work without remarkable issues, so IMHO I see only the system-related reasons. But yet another QUESTION: How does the upperside of your CPU with removed heatsink look like? In my case there's a soft grey sticker/label (I'm not english, so I hope one of the expressions might be appropriate). That's the only part which transfers the heat to the heatsink. Can that become to old, useless or must it be renewed? What could be an alternative? I think about a fitting piece of copper or a plate of lead. In my eyes Apple's original solution isn't very effective at all. regards Dirk What's your opinion??? On Oct 11, 11:37 pm, Alex Santos <[email protected]> wrote: > You may have a runaway application…check your system profiler for any > app that is just sitting there taking up a lot of cpu cycles. > > Also, you mentioned safe boot allowed a startup, you may want to run > disk utility to check your drive and also consider what you might have > installed most recently as there could be a software conflict. > > Try starting up from the Tiger DVD to understand if that reproduces > the issue. If it doesm you may want to reset the PMU — do a google > search for pmu (power management unit). Search google 'pmu powerbook > site:support.apple.com' > > I am not entirely sure about the Pismo, but most macs have sensors > that will deliberately shutdown the mac if it gets too hot. You may > want to call AppleCare even if you are outside warranty so that you > can report the issue. > > Consider also, removing all external hardware while you test and ask > yourself if you installed RAM recently and remove it if that was done. > You should bring your mac down to a minimum configuration both > hardware and software wise to rule out those two before considering > your mac defective. > > Hope this helps > alex > > On 10 Oct 2009, at 11:04, MacDirk wrote: > > > > > > > Hello friends of the Pismo out there, > > > over the course of my last (and first :-) thread > >http://groups.google.com/group/g-books/t/686616e77d62adb4"Pismo won't > > start except in safe mode..." > > > I made the mistake to begin another subject in that thread. Sorry. > > > So here a new thread and question: > > > I experienced my Pismo (G3/400) for the first time (maybe only > > noticed) to become quite hot. > > The keyboard was removed, heatsink and covering plate fixed firmly. > > After some, but not intensive usage for about the length of an > > installation (Tiger) I remarked the Pismo to become very hot > > > (my definition without technical sensor: too hot to stay on the part > > with the fingers for a longer time is def. too hot. Hot would be if > > you can stay on it for long, but you've the feeling it is "hot", the > > rest might be "warm". As most of us won't use any sensor/device to get > > precise data, this could work) > > > My question is: Is hot (means so hot, that you can touch for long) too > > hot for the long-time survival of the Pismo??? > > > Hope you can show me the way... > > > Regards > > MacDirk --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Books, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g-books Support for older Macs: http://lowendmac.com/services/ -~----------~----~----~----~------~----~------~--~---
