Well, that didn't work out as I expected... G3DT Rev B 266mhz. enough RAM (160mb), enough HD (4gb, two partitions. 1 1gb, the other 3gb). Clean 9.1 install on fresh 1 gb partition. Start Install X.1 Black screen Restart White screen with the following:
unknown word Open Firmware, 2.4 To continue booting Mac O/s type: BYE(return) To continue booting from default boot device type: BOOT(return) For Open Firmware serial number I/O type: TTYA(return) ok o> and that's all she wrote... I've zapped, CUDA'd, added and removed drives to the point that the CD is all that's left, pulled PRAM battery, Vulcan nerve pinched and everything else I can think of... Won't boot from anything, not CD, not HDD, not floppy. Reseated cards too. . Same message. Immediately. Way before it goes looking for drives. What do I do now? Throw it in the dumpster? Shoot, I've only owned it for about 4 hours... -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
