On Sunday, November 17, 2002, at 01:00 PM, Paul Nicholson wrote: > This is my second attempt to add a large hard drive to a Blue and > White G3. The drive is recognized and partitions and formats > correctly, however when I install OS X 10.2 , 10.1, or OS 9, the > installation process quits giving various error messages complaining > about the hard drive. >
I find this very strange Are you using Apple's Drive Setup Utility with Apple Drivers to format and Partition , and have the Drive jumpered for Master ? On my B&W Yosemite / V1 MOBO , I replaced the stock IDE 12GB drive to the MOBO with an IBM IDE 60GXP 7200RPM 40GB. jumpered for Master. I used Apple's Drive Setup Utility/ drivers to partition and format ; and then installed both 9.1 and OSX out to 10.2.1 without any problems. Can't see that going from 40GB to 60GB would be a problem, but? BTW. The V1 IDE chip "problem" had to do only with not being able to reliably add a Slave drive along with a Master drive albert -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
