That was my first impression but it seems that a different pattern of led's are mentioned in the manual for fuser failure. The fuser roller is getting hot. It may be a fuser control issue, but the fuser lamp is working.
I was researching the manuals tonight and ran across a section mentioning that there was a revised cartridge sensor that was supplied to correct some similar problems. Anyone know where to get Laserwriter parts? James > Isn't this the "fuser dead" signal? > I know this is the G-List, but since I use the printer with my G3 it may >> not be too off topic. My Laserwriter 8500 has started flashing the >> paper jam and paper out lights. It seems to go through warm up, the >> rollers turn and the warm up light flashes and then the two lights begin >> a slow flash. I have the SM but I don't have the "green" loop-back plug >> to force an E-POST. The lights are not alternating like shown in the >> SM, they flash together. Any ideas? Does anyone have the pin out for >> the "green" loop-back plug? >> >> Thanks. -- http://webpages.charter.net/jrice54/classiccomp2.html -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
