--- You wrote: If you're reasonably handy, you can even make one yourself. They sell the ribbon cable and connectors that clamp on (I used a bench vise to do it. I used smooth jaws and was careful about the pressure I applied. The key is applying even pressure all across the connector and keeping everything straight. I've made lots of ribbon cables this way.) Again, a decent electronics shop ought to carry the things you need for this. --- end of quote --- Bruce,
The fourth drive in my Beige MT is still on the motherboard rather than the fast controller card because I can't come up with a setup that allows cabling to all the drives. I imagine an extension for the slave port on a standard cable. Have you ever seen such a thing, or, seen the parts (male and female clamp-on connectors, that would allow me to make one? Rich -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
