You will need to use insulating spacers underneath the motherboard or it will ground out on the PC case, nothing will work. The Mac boards seem to be a little different from PC boards in their required clearance, standard PC board mounts don't get the Mac mobo up high enough. I've put together a couple of FrankenMacs and I always have needed a little additional height to keep the mobo clear of the PC case.
On Nov 19, 9:14 am, Dennis Myhand <[EMAIL PROTECTED]> wrote: > Also. I am getting tired of seeing the logic board laid out like an > autopsy victim and I am wanting to encase this puppy. I doubt I will > have a Mac case to put it in. In putting it in an old PC case, do I > need to use insulating washers on the back or front side of the logic > board? Thanks, Dennis in Edna, TX --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed Low End Mac's G3-5 List, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/g3-5-list?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
