On Sun, Sep 6, 2009 at 12:19 AM, Stephen Conrad <[email protected]> wrote:
> > OK, I am now using OS X 10.4.11 on a Quicksilver > I thought I'd try again to se if I could access 2 older Digital > Cameras (both are the same model) so I downloaded Macam 0.9.2 (after > searching for Macam OS X 10.4.11) and the Driver for that camera > (SS702, got it from a link off this list). > So far no luck. Image capture says there is "No Image Capture device > connected" and Macam does not see the camera either. > > ___________________________________ Just throwing out random thought FWIW Ok? Does the cam have a removable card? If you take it out does iASP say the same thing? If so; Dirty card edge or slot? If ASP sees the cam why does it ( OS X ) not *go* to the cam? Hmmmm!? Cable dirty on 1 connector only?" Try cleaning all USB Ports and both ends of cable? Or; Worn or frayed cable? Interior wear or breakage unseen from outside. Try connecting other device with that cable? See if *IT* works. Is the camera battery fully charged? Mine won't transfer pics without full battery power. Dirty battery terminals. I would love to know if any of my guesses are correct. Good luck, -- Adrian D'Alessio aka; Fluxstringer [email protected] http://www.facebook.com/FluxStringer http://flux-influx.blogspot.com/ http://fluxdreams.designbinder.com/ http://twitter.com/FluxStringer http://mog.com/FluxMuse --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g3-5-list -~----------~----~----~----~------~----~------~--~---
