On Tue, 2008-09-30 at 21:13 +0400, Ineiev wrote: > Hi, Peter; > > On Tue, Sep 30, 2008 at 5:10 PM, Peter Clifton <[EMAIL PROTECTED]> wrote: > > I've attached an updated patch which re-adds extra bloat to the rect > > being ubsubtracted. > > > > What isn't clear to me, is why so much bloat? (50-101). Why in other > > cases, is the bloat 50, or 101? > > > > I've set bloat for the ubsubtract at 50 for now. Is that going to be > > enough? > > DJ's board (http://www.delorie.com/pcb/rotated-pads.pcb) shows it is not: > when I move the footprint with rectangular pads, it leaves holes in the > polygon. I tried to increase it to 100, but it did not help, too; perhaps > the bounding boxes are not assigned precisely enough.
Ok, thanks for the pointer. Sounds like the bounding box might be broken in those cases - and that is probably where the fix needs to be. Still... 100 in internal PCB units is what - 1mil? -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-dev mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
