On 9/29/06, Stefan Salewski <[EMAIL PROTECTED]> wrote:
Hello,
I am using newlib gEDA footprints from www.luciani.org
( pcb-symbols-jcl_2006-8-20.tgz).
I am not sure if pin- numbering of USB-Type-B connector called
CON_USB_TYPEB__Keystone_924 is correct. I have an identically
looking connector from www.reichelt.de (Assmann). This connector
is wired internally without crossing wires, which is the
simplest way. Internal wiring of CON_USB_TYPEB__Keystone_924 is
not shown at Keystone homepage, but I think it should be
identical to my connctor.
So I think that pin-numbers of CON_USB_TYPEB__Keystone_924 are
wrong, V+ is exchanged with GND and D+ is exchanged with D-.
Has someone used the Keystone 924 USB-Connentor and can tell me
if my assumption about exchanged pins is right or wrong?
Could you send me a pdf file that contains the Manufacturer's datasheet
for the part you are using. I will take a look at the Keystone 924 spec
this morning.
Thanks.
(* jcl *)
--
http://www.luciani.org
_______________________________________________
geda-user mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
