Hi Ning, I have already used the console=ttyO2,115200n8 in the boot argument but it still hangs. Hi Venkat, Have you made any changes in the kernel/fs for TI platform. I have made changes in usr/lib/systemd and etc/systemd.
Have you made any changes in rootfs while building for panda board? Please help to solve the issue. Thanks On Wed, Feb 6, 2013 at 10:30 AM, <[email protected]> wrote: > Try console=tty02,115200n8, It works on OMAP4 panda board for different > kernel version. > > > > > > Thanks, > > Venkat Raju > > > > -----Original Message----- > From: "Wang, Ning W" <[email protected]> > Sent: Wednesday, February 6, 2013 8:23am > To: "abhishek tejaswi" <[email protected]>, "ravi kumar" < > [email protected]> > Cc: "[email protected]" <[email protected]> > Subject: Re: [Tizen General] Not able to get serial terminal after tizen > fs mount. > > Have you tried system console by using this kernel boot command line: > > console=ttyS0,115200n8 ? > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *abhishek tejaswi > *Sent:* Tuesday, February 05, 2013 11:08 PM > *To:* ravi kumar > *Cc:* [email protected] > *Subject:* Re: [Tizen General] Not able to get serial terminal after > tizen fs mount. > > Hi Ravi, > Thanks for the response. I have already made changes in inittab file as > *con:12345:respawn:/sbin/agetty > -L 115200 ttyO0 vt100 where ttyO0* is used on serial port for TI > platform. > My problem is that the file system is mounting properly but only serial > termina shelll is not getting prompted. The file system build is for armv7l > which by default takes ttySAC2 for samsung exynos. ttyO0 is used for TI. Is > there mismatch here? I mean I am waiting for response from ttyO0 but it is > logging onto ttySAC2? > Can you please tell me what kind of changes I need to make in order to > build mic image for a TI platform? > > Thanks again for the help. > > On Tue, Feb 5, 2013 at 7:20 PM, ravi kumar <[email protected]> wrote: > > Hi Abhishek, > > For enable serial console.. > > you have to Check in /etc/inittab file, serial console enabled or not. > > If it is not enable, then you should enable that line. > > Regards, > Ravi > > On Tue, Feb 5, 2013 at 7:13 PM, abhishek tejaswi < > [email protected]> wrote: > > Hi all, > I am trying to bring up Tizen on Ti platform. Currently I am able to > compile the linux 2.6.37 kernel, created fs image using mic for armv7l. > Kernel loads properly but file system initialization is not happening > properly and hangs. After giving message > Started Connection service [ > OK ] > Starting WPA Supplicant > daemon... > Started Login Service > [ OK ] > Started WPA Supplicant daemon [ OK ] > eth0: no IPv6 routers present > > I want to get shell to debug the issues. Can anybody let me know how to > get shell in tizen? I am using ttyO0 and giving the same as argument while > booting up. > > I have attached the file for reference. > > Please help me solve the issue. > > Thanks > > _______________________________________________ > General mailing list > [email protected] > https://lists.tizen.org/listinfo/general > >
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
