Hi Abhoshek,
 
I've taken TI-Ubuntu kernel and enabled SMACK form the kernel configuration.To 
get the shell on serial console I've changed /etc/inittab entry as earlier 
mentioned this same mail thread.
 
To bring up the UI,  there are some Xserver packages like xf86omap , 
libdrm_omap stuff like that, These packages I've compiled and installed in 
Tizen RFS.
 
This is very  brief info, we are planning to release the detailed  document 
soon.
 
Thanks,
Venkat Raju.
 
 
-----Original Message-----
From: "abhishek tejaswi" <[email protected]>
Sent: Wednesday, February 6, 2013 11:25am
To: [email protected]
Cc: "Wang, Ning W" <[email protected]>, "ravi kumar" 
<[email protected]>, "[email protected]" <[email protected]>
Subject: Re: [Tizen General] Not able to get serial terminal after tizen fs 
mount.



Hi Ning,
I have already used the console=ttyO2,115200n8 in the boot argument but it 
still hangs.
 Hi Venkat,
Have you made any changes in the kernel/fs for TI platform. I have made changes 
in usr/lib/systemd and etc/systemd.

Have you made any changes in rootfs while building for panda board?

Please help to solve the issue.
 Thanks

On Wed, Feb 6, 2013 at 10:30 AM,  <[mailto:[email protected]] 
[email protected]> wrote:

Try console=tty02,115200n8, It works on OMAP4 panda board for different kernel 
version.
 
 
Thanks,
Venkat Raju


 
-----Original Message-----
From: "Wang, Ning W" <[mailto:[email protected]] [email protected]>
Sent: Wednesday, February 6, 2013 8:23am
 To: "abhishek tejaswi" <[mailto:[email protected]] 
[email protected]>, "ravi kumar" <[mailto:[email protected]] 
[email protected]>
 Cc: "[mailto:[email protected]] [email protected]" 
<[mailto:[email protected]] [email protected]>
Subject: Re: [Tizen General] Not able to get serial terminal after tizen fs 
mount.




Have you tried system console by using this kernel boot command line:
console=ttyS0,115200n8 ?
 

From: [mailto:[email protected]] [email protected] 
[mailto:[mailto:[email protected]] 
[email protected]] On Behalf Of abhishek tejaswi
Sent: Tuesday, February 05, 2013 11:08 PM
To: ravi kumar
Cc: [mailto:[email protected]] [email protected]
Subject: Re: [Tizen General] Not able to get serial terminal after tizen fs 
mount.
 
Hi Ravi,
 Thanks for the response. I have already made changes in inittab file as 
con:12345:respawn:/sbin/agetty -L 115200 ttyO0 vt100 where ttyO0 is used on  
serial port for TI platform.
 My problem is that the file system is mounting properly but only serial 
termina shelll is not getting prompted. The file system build is for armv7l 
which by default takes ttySAC2 for samsung exynos. ttyO0 is used for TI. Is 
there mismatch here? I mean  I am  waiting for response from ttyO0 but it is 
logging onto ttySAC2?
 Can you please tell me what kind of changes I need to make in order to build 
mic image for a TI platform?

 Thanks again for the help.

On Tue, Feb 5, 2013 at 7:20 PM, ravi kumar <[mailto:[email protected]] 
[email protected]> wrote:




Hi Abhishek,

For enable serial console..
you have to Check in /etc/inittab file, serial console enabled or not.
If it is not enable, then you should enable that line.
Regards,
 Ravi

 

 

 



On Tue, Feb 5, 2013 at 7:13 PM, abhishek tejaswi 
<[mailto:[email protected]] [email protected]> wrote:


Hi all,
 I am trying to bring up Tizen on Ti platform. Currently I am able to compile 
the linux 2.6.37 kernel, created fs image using mic for armv7l. Kernel loads 
properly but  file system initialization is not happening properly and hangs. 
After giving message
 Started Connection service                                             [  OK  ]
 Starting WPA Supplicant daemon...                                              
 Started Login Service                                                     [  
OK  ]
 Started WPA Supplicant daemon                                     [  OK  ]
 eth0: no IPv6 routers present

 I want to get shell to debug the issues. Can anybody let me know how to get 
shell in tizen? I am using ttyO0 and giving the same as argument while booting 
up.

 I have attached the file for reference.

Please help me solve the issue.

 Thanks
 
_______________________________________________
 General mailing list
[mailto:[email protected]] [email protected]
[https://lists.tizen.org/listinfo/general] 
https://lists.tizen.org/listinfo/general
 
 
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general

Reply via email to