Hi Venkat, Thanks for the response. I used the latest 3.0.1 kernel and I could get the shell properly. The issue was with the older kernel which had missing packages needed by systemd.
Thanks again. Regards On Wed, Feb 6, 2013 at 11:42 AM, <[email protected]> wrote: > Hi Abhoshek, > > > > I've taken TI-Ubuntu kernel and enabled SMACK form the kernel > configuration.To get the shell on serial console I've changed /etc/inittab > entry as earlier mentioned this same mail thread. > > > > To bring up the UI, there are some Xserver packages like xf86omap , > libdrm_omap stuff like that, These packages I've compiled and installed in > Tizen RFS. > > > > This is very brief info, we are planning to release the detailed > document soon. > > > > Thanks, > > Venkat Raju. > > > > > > -----Original Message----- > From: "abhishek tejaswi" <[email protected]> > Sent: Wednesday, February 6, 2013 11:25am > To: [email protected] > Cc: "Wang, Ning W" <[email protected]>, "ravi kumar" < > [email protected]>, "[email protected]" <[email protected]> > Subject: Re: [Tizen General] Not able to get serial terminal after tizen > fs mount. > > Hi Ning, > I have already used the console=ttyO2,115200n8 in the boot argument but > it still hangs. > Hi Venkat, > Have you made any changes in the kernel/fs for TI platform. I have made > changes in usr/lib/systemd and etc/systemd. > > Have you made any changes in rootfs while building for panda board? > > Please help to solve the issue. > Thanks > On Wed, Feb 6, 2013 at 10:30 AM, <[email protected]> wrote: > >> Try console=tty02,115200n8, It works on OMAP4 panda board for different >> kernel version. >> >> >> >> >> >> Thanks, >> >> Venkat Raju >> >> >> >> -----Original Message----- >> From: "Wang, Ning W" <[email protected]> >> Sent: Wednesday, February 6, 2013 8:23am >> To: "abhishek tejaswi" <[email protected]>, "ravi kumar" < >> [email protected]> >> Cc: "[email protected]" <[email protected]> >> Subject: Re: [Tizen General] Not able to get serial terminal after tizen >> fs mount. >> >> Have you tried system console by using this kernel boot command line: >> >> console=ttyS0,115200n8 ? >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *abhishek tejaswi >> *Sent:* Tuesday, February 05, 2013 11:08 PM >> *To:* ravi kumar >> *Cc:* [email protected] >> *Subject:* Re: [Tizen General] Not able to get serial terminal after >> tizen fs mount. >> >> Hi Ravi, >> Thanks for the response. I have already made changes in inittab file as >> *con:12345:respawn:/sbin/agetty >> -L 115200 ttyO0 vt100 where ttyO0* is used on serial port for TI >> platform. >> My problem is that the file system is mounting properly but only serial >> termina shelll is not getting prompted. The file system build is for armv7l >> which by default takes ttySAC2 for samsung exynos. ttyO0 is used for TI. Is >> there mismatch here? I mean I am waiting for response from ttyO0 but it is >> logging onto ttySAC2? >> Can you please tell me what kind of changes I need to make in order to >> build mic image for a TI platform? >> >> Thanks again for the help. >> >> On Tue, Feb 5, 2013 at 7:20 PM, ravi kumar <[email protected]> wrote: >> >> Hi Abhishek, >> >> For enable serial console.. >> >> you have to Check in /etc/inittab file, serial console enabled or not. >> >> If it is not enable, then you should enable that line. >> >> Regards, >> Ravi >> >> On Tue, Feb 5, 2013 at 7:13 PM, abhishek tejaswi < >> [email protected]> wrote: >> >> Hi all, >> I am trying to bring up Tizen on Ti platform. Currently I am able to >> compile the linux 2.6.37 kernel, created fs image using mic for armv7l. >> Kernel loads properly but file system initialization is not happening >> properly and hangs. After giving message >> Started Connection service [ >> OK ] >> Starting WPA Supplicant >> daemon... >> Started Login Service >> [ OK ] >> Started WPA Supplicant daemon [ OK ] >> eth0: no IPv6 routers present >> >> I want to get shell to debug the issues. Can anybody let me know how to >> get shell in tizen? I am using ttyO0 and giving the same as argument while >> booting up. >> >> I have attached the file for reference. >> >> Please help me solve the issue. >> >> Thanks >> >> _______________________________________________ >> General mailing list >> [email protected] >> https://lists.tizen.org/listinfo/general >> >>
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
