I would second Leon's advice here to move to Tizen 3 (e.g. Tizen Common). You may nevertheless be interested in an earlier versoin of Tizen 2 (alpha ARM release) that was done for the Panda board (back in May 2013): https://wiki.tizen.org/wiki/IVI/IVI_May_4,_2013_2.0_Alpha_ARM_release
Geoffroy > -----Original Message----- > From: General [mailto:[email protected]] On Behalf Of Leon > Anavi > Sent: Thursday, December 04, 2014 12:54 PM > To: Akhil Panayamparambil > Cc: [email protected] > Subject: Re: [Tizen General] Pandaboard ES stuck at Menu Screen > > Hi Akhil, > > I am the one who created the article at the Tizen Wiki based on the following > document from Samsung Electronics: > https://wiki.tizen.org/w/images/f/f2/Tizen_IVI_Getting_Started_Guide_For_ > PandaBoard.pdf > > I don't have PandaBoard to try out the whole procedure but I have used the > similar approach to port Tizen 2.0 IVI on A10S-OLinuXino-MICRO and A20- > OLinuXino-MICRO. > > Tizen 2.0 is a very old version of Tizen. It is highly recommended NOT (I > would even say pointless) to use it. It is recommended to use latest Tizen > releases such as Tizen:Common or any of the other Tizen 3 profiles. > > Best regards, > Leon > > On 2014-12-04 13:46, Akhil Panayamparambil wrote: > > Hi, > > > > I was trying to port Tizen 2.0 to my pandaboard ES. I downloaded the > > Tizen images for the repo and copied it to the SD card. I already had > > the MLO and Uboot for the same board and the kernel I compiled from > > the source provided by > > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_PandaB > > oard [1] with Tizen Config. The boot was successful, besides some > > issues in resolution. I can slide unlock the menu and after that the > > controller gets stuck. I have checked the log in serial out. The last > > log says " > > do_calibrate: mpu: Calibration complete: Voltage Nominal…." . Please > > help me with this. > > > > Thanks and Regards, > > > > AKHIL P > > > > ------------------------- > > > > CONFIDENTIALITY STATEMENT / DISCLAIMER : This message and any > > attachments is intended for the sole use of the intended recipient. It > > may contain confidential information. Any unauthorized use, > > dissemination or modification is strictly prohibited. If you are not > > the intended recipient, please notify the sender immediately then > > delete it from all your systems, and do not copy, use or print. > > Internet communications are not secure and it is the responsibility of > > the recipient to make sure that it is virus/malicious code exempt. > > > > The company/sender cannot be responsible for any unauthorized > > alterations or modifications made to the contents. If you require any > > form of confirmation of the contents, please contact the > > company/sender. The company/sender is not liable for any errors or > > omissions in the content of this message. > > > > ------------------------- > > > > > > Links: > > ------ > > [1] > > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_PandaB > > oard > > > > _______________________________________________ > > General mailing list > > [email protected] > > https://lists.tizen.org/listinfo/general > > -- > http://anavi.org/ > _______________________________________________ > General mailing list > [email protected] > https://lists.tizen.org/listinfo/general _______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
