Hi Akhil,
On 2014-12-04 14:50, Akhil Panayamparambil wrote:
Can you please direct me from where I could find the
images for Pandaboard ES Tizen 3.0?
Pandaboard ES has ARMv7 compatible CPU which means that you can use the
images available here:
http://download.tizen.org/snapshots/tizen/common/latest/images/
Keep in my mind that some efforts will be needed to get any of these
images running on the board.
Tizen:Common works on other ARMv7 boards such as A20-OLinuXino, Radxa
Rock, and UDROID-U3. Recently I got it working on Radxa Rock and I have
describe the porting process at my blog (when I have time I will
transfer the info to Tizen wiki too):
https://www.anavi.org/article/168/
Or is it like we have to port it
from scratch with GBS and MIC ? And thank you for the fast and prompt
reply you guys gave me.
It is also possible to build rpms of Tizen:Common or any other Tizen 3
profiles locally with GBS and to create an image. If you want to do it
please read carefully all articles related to following page:
https://source.tizen.org/documentation/developer-guide/all-one-instructions/creating-tizen-images-scratch-one-page
Building Tizen from scratch requires a powerful hardware. Based on
personal experience it is recommended to build it on personal computer
with Intel i7 CPU and at least 8GB RAM. Otherwise the build process
would require too much time.
Best regards,
Leon
-----Original Message-----
From: VanCutsem, Geoffroy [mailto:[email protected]]
Sent: Thursday, December 04, 2014 5:32 PM
To: Leon Anavi; Akhil Panayamparambil
Cc: [email protected]
Subject: RE: [Tizen General] Pandaboard ES stuck at Menu Screen
I would second Leon's advice here to move to Tizen 3 (e.g. Tizen
Common).
You may nevertheless be interested in an earlier versoin of Tizen 2
(alpha ARM release) that was done for the Panda board (back in May
2013):
https://wiki.tizen.org/wiki/IVI/IVI_May_4,_2013_2.0_Alpha_ARM_release
Geoffroy
-----Original Message-----
From: General [mailto:[email protected]] On Behalf Of
Leon Anavi
Sent: Thursday, December 04, 2014 12:54 PM
To: Akhil Panayamparambil
Cc: [email protected]
Subject: Re: [Tizen General] Pandaboard ES stuck at Menu Screen
Hi Akhil,
I am the one who created the article at the Tizen Wiki based on the
following document from Samsung Electronics:
https://wiki.tizen.org/w/images/f/f2/Tizen_IVI_Getting_Started_Guide_F
or_
PandaBoard.pdf
I don't have PandaBoard to try out the whole procedure but I have used
the similar approach to port Tizen 2.0 IVI on A10S-OLinuXino-MICRO and
A20- OLinuXino-MICRO.
Tizen 2.0 is a very old version of Tizen. It is highly recommended NOT
(I would even say pointless) to use it. It is recommended to use
latest Tizen releases such as Tizen:Common or any of the other Tizen 3
profiles.
Best regards,
Leon
On 2014-12-04 13:46, Akhil Panayamparambil wrote:
> Hi,
>
> I was trying to port Tizen 2.0 to my pandaboard ES. I downloaded
> the Tizen images for the repo and copied it to the SD card. I
> already had the MLO and Uboot for the same board and the kernel I
> compiled from the source provided by
> https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pand
> aB oard [1] with Tizen Config. The boot was successful, besides some
> issues in resolution. I can slide unlock the menu and after that the
> controller gets stuck. I have checked the log in serial out. The
> last log says "
> do_calibrate: mpu: Calibration complete: Voltage Nominal…." . Please
> help me with this.
>
> Thanks and Regards,
>
> AKHIL P
>
> -------------------------
>
> CONFIDENTIALITY STATEMENT / DISCLAIMER : This message and any
> attachments is intended for the sole use of the intended recipient.
> It may contain confidential information. Any unauthorized use,
> dissemination or modification is strictly prohibited. If you are not
> the intended recipient, please notify the sender immediately then
> delete it from all your systems, and do not copy, use or print.
> Internet communications are not secure and it is the responsibility
> of the recipient to make sure that it is virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized
> alterations or modifications made to the contents. If you require
> any form of confirmation of the contents, please contact the
> company/sender. The company/sender is not liable for any errors or
> omissions in the content of this message.
>
> -------------------------
>
>
> Links:
> ------
> [1]
> https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pand
> aB
> oard
>
> _______________________________________________
> General mailing list
> [email protected]
> https://lists.tizen.org/listinfo/general
--
http://anavi.org/
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
________________________________
Confidentiality Statement / Disclaimer : This message and any
attachments is intended for the sole use of the intended recipient. It
may contain confidential information. Any unauthorized use,
dissemination or modification is strictly prohibited. If you are not
the intended recipient, please notify the sender immediately then
delete it from all your systems, and do not copy, use or print.
Internet communications are not secure and it is the responsibility of
the recipient to make sure that it is virus/malicious code exempt.
The company/sender cannot be responsible for any unauthorized
alterations or modifications made to the contents. If you require any
form of confirmation of the contents, please contact the
company/sender. The company/sender is not liable for any errors or
omissions in the content of this message.
________________________________
--
http://anavi.org/
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
