Leon,
Thanks a lot for your support. I shall try with below mentioned rfs and
let you know.
-----Original Message-----
From: Leon Anavi [mailto:[email protected]]
Sent: Thursday, December 04, 2014 6:45 PM
To: Akhil Panayamparambil
Cc: VanCutsem, Geoffroy; [email protected]
Subject: RE: [Tizen General] Pandaboard ES stuck at Menu Screen
Hi Akhil,
On 2014-12-04 14:50, Akhil Panayamparambil wrote:
> Can you please direct me from where I could find the images for
> Pandaboard ES Tizen 3.0?
Pandaboard ES has ARMv7 compatible CPU which means that you can use the images
available here:
http://download.tizen.org/snapshots/tizen/common/latest/images/
Keep in my mind that some efforts will be needed to get any of these images
running on the board.
Tizen:Common works on other ARMv7 boards such as A20-OLinuXino, Radxa Rock, and
UDROID-U3. Recently I got it working on Radxa Rock and I have describe the
porting process at my blog (when I have time I will transfer the info to Tizen
wiki too):
https://www.anavi.org/article/168/
> Or is it like we have to port it
> from scratch with GBS and MIC ? And thank you for the fast and prompt
> reply you guys gave me.
It is also possible to build rpms of Tizen:Common or any other Tizen 3 profiles
locally with GBS and to create an image. If you want to do it please read
carefully all articles related to following page:
https://source.tizen.org/documentation/developer-guide/all-one-instructions/creating-tizen-images-scratch-one-page
Building Tizen from scratch requires a powerful hardware. Based on personal
experience it is recommended to build it on personal computer with Intel i7 CPU
and at least 8GB RAM. Otherwise the build process would require too much time.
Best regards,
Leon
>
>
> -----Original Message-----
> From: VanCutsem, Geoffroy [mailto:[email protected]]
> Sent: Thursday, December 04, 2014 5:32 PM
> To: Leon Anavi; Akhil Panayamparambil
> Cc: [email protected]
> Subject: RE: [Tizen General] Pandaboard ES stuck at Menu Screen
>
> I would second Leon's advice here to move to Tizen 3 (e.g. Tizen
> Common).
>
> You may nevertheless be interested in an earlier versoin of Tizen 2
> (alpha ARM release) that was done for the Panda board (back in May
> 2013):
> https://wiki.tizen.org/wiki/IVI/IVI_May_4,_2013_2.0_Alpha_ARM_release
>
> Geoffroy
>
>
>
>> -----Original Message-----
>> From: General [mailto:[email protected]] On Behalf Of
>> Leon Anavi
>> Sent: Thursday, December 04, 2014 12:54 PM
>> To: Akhil Panayamparambil
>> Cc: [email protected]
>> Subject: Re: [Tizen General] Pandaboard ES stuck at Menu Screen
>>
>> Hi Akhil,
>>
>> I am the one who created the article at the Tizen Wiki based on the
>> following document from Samsung Electronics:
>> https://wiki.tizen.org/w/images/f/f2/Tizen_IVI_Getting_Started_Guide_
>> F
>> or_
>> PandaBoard.pdf
>>
>> I don't have PandaBoard to try out the whole procedure but I have
>> used the similar approach to port Tizen 2.0 IVI on
>> A10S-OLinuXino-MICRO and
>> A20- OLinuXino-MICRO.
>>
>> Tizen 2.0 is a very old version of Tizen. It is highly recommended
>> NOT (I would even say pointless) to use it. It is recommended to use
>> latest Tizen releases such as Tizen:Common or any of the other Tizen
>> 3 profiles.
>>
>> Best regards,
>> Leon
>>
>> On 2014-12-04 13:46, Akhil Panayamparambil wrote:
>> > Hi,
>> >
>> > I was trying to port Tizen 2.0 to my pandaboard ES. I downloaded
>> > the Tizen images for the repo and copied it to the SD card. I
>> > already had the MLO and Uboot for the same board and the kernel I
>> > compiled from the source provided by
>> > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pan
>> > d aB oard [1] with Tizen Config. The boot was successful, besides
>> > some issues in resolution. I can slide unlock the menu and after
>> > that the controller gets stuck. I have checked the log in serial
>> > out. The last log says "
>> > do_calibrate: mpu: Calibration complete: Voltage Nominal…." .
>> > Please help me with this.
>> >
>> > Thanks and Regards,
>> >
>> > AKHIL P
>> >
>> > -------------------------
>> >
>> > CONFIDENTIALITY STATEMENT / DISCLAIMER : This message and any
>> > attachments is intended for the sole use of the intended recipient.
>> > It may contain confidential information. Any unauthorized use,
>> > dissemination or modification is strictly prohibited. If you are
>> > not the intended recipient, please notify the sender immediately
>> > then delete it from all your systems, and do not copy, use or print.
>> > Internet communications are not secure and it is the responsibility
>> > of the recipient to make sure that it is virus/malicious code exempt.
>> >
>> > The company/sender cannot be responsible for any unauthorized
>> > alterations or modifications made to the contents. If you require
>> > any form of confirmation of the contents, please contact the
>> > company/sender. The company/sender is not liable for any errors or
>> > omissions in the content of this message.
>> >
>> > -------------------------
>> >
>> >
>> > Links:
>> > ------
>> > [1]
>> > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pan
>> > d
>> > aB
>> > oard
>> >
>> > _______________________________________________
>> > General mailing list
>> > [email protected]
>> > https://lists.tizen.org/listinfo/general
>>
>> --
>> http://anavi.org/
>> _______________________________________________
>> General mailing list
>> [email protected]
>> https://lists.tizen.org/listinfo/general
> ________________________________
>
> Confidentiality Statement / Disclaimer : This message and any
> attachments is intended for the sole use of the intended recipient. It
> may contain confidential information. Any unauthorized use,
> dissemination or modification is strictly prohibited. If you are not
> the intended recipient, please notify the sender immediately then
> delete it from all your systems, and do not copy, use or print.
> Internet communications are not secure and it is the responsibility of
> the recipient to make sure that it is virus/malicious code exempt.
>
> The company/sender cannot be responsible for any unauthorized
> alterations or modifications made to the contents. If you require any
> form of confirmation of the contents, please contact the
> company/sender. The company/sender is not liable for any errors or
> omissions in the content of this message.
>
> ________________________________
--
http://anavi.org/
________________________________
Confidentiality Statement / Disclaimer : This message and any attachments is
intended for the sole use of the intended recipient. It may contain
confidential information. Any unauthorized use, dissemination or modification
is strictly prohibited. If you are not the intended recipient, please notify
the sender immediately then delete it from all your systems, and do not copy,
use or print. Internet communications are not secure and it is the
responsibility of the recipient to make sure that it is virus/malicious code
exempt.
The company/sender cannot be responsible for any unauthorized alterations or
modifications made to the contents. If you require any form of confirmation of
the contents, please contact the company/sender. The company/sender is not
liable for any errors or omissions in the content of this message.
________________________________
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
