Dear Leon and Geoffroy,
First of let me tell you I am new to Tizen and I have referred Leon's
article for porting. I found it very useful and interesting. And I have
downloaded the image files for each rfs, data and UMS from the link given below.
http://download.tizen.org/releases/previews/2.0/ivi-panda/tizen-2.0_20131119.2/images/ivi-panda/
Also I have tried it with the 2.1alpha version which was not working as good as
2.0. Can you please direct me from where I could find the images for Pandaboard
ES Tizen 3.0? Or is it like we have to port it from scratch with GBS and MIC ?
And thank you for the fast and prompt reply you guys gave me.
-----Original Message-----
From: VanCutsem, Geoffroy [mailto:[email protected]]
Sent: Thursday, December 04, 2014 5:32 PM
To: Leon Anavi; Akhil Panayamparambil
Cc: [email protected]
Subject: RE: [Tizen General] Pandaboard ES stuck at Menu Screen
I would second Leon's advice here to move to Tizen 3 (e.g. Tizen Common).
You may nevertheless be interested in an earlier versoin of Tizen 2 (alpha ARM
release) that was done for the Panda board (back in May 2013):
https://wiki.tizen.org/wiki/IVI/IVI_May_4,_2013_2.0_Alpha_ARM_release
Geoffroy
> -----Original Message-----
> From: General [mailto:[email protected]] On Behalf Of
> Leon Anavi
> Sent: Thursday, December 04, 2014 12:54 PM
> To: Akhil Panayamparambil
> Cc: [email protected]
> Subject: Re: [Tizen General] Pandaboard ES stuck at Menu Screen
>
> Hi Akhil,
>
> I am the one who created the article at the Tizen Wiki based on the
> following document from Samsung Electronics:
> https://wiki.tizen.org/w/images/f/f2/Tizen_IVI_Getting_Started_Guide_F
> or_
> PandaBoard.pdf
>
> I don't have PandaBoard to try out the whole procedure but I have used
> the similar approach to port Tizen 2.0 IVI on A10S-OLinuXino-MICRO and
> A20- OLinuXino-MICRO.
>
> Tizen 2.0 is a very old version of Tizen. It is highly recommended NOT
> (I would even say pointless) to use it. It is recommended to use
> latest Tizen releases such as Tizen:Common or any of the other Tizen 3
> profiles.
>
> Best regards,
> Leon
>
> On 2014-12-04 13:46, Akhil Panayamparambil wrote:
> > Hi,
> >
> > I was trying to port Tizen 2.0 to my pandaboard ES. I downloaded
> > the Tizen images for the repo and copied it to the SD card. I
> > already had the MLO and Uboot for the same board and the kernel I
> > compiled from the source provided by
> > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pand
> > aB oard [1] with Tizen Config. The boot was successful, besides some
> > issues in resolution. I can slide unlock the menu and after that the
> > controller gets stuck. I have checked the log in serial out. The
> > last log says "
> > do_calibrate: mpu: Calibration complete: Voltage Nominal…." . Please
> > help me with this.
> >
> > Thanks and Regards,
> >
> > AKHIL P
> >
> > -------------------------
> >
> > CONFIDENTIALITY STATEMENT / DISCLAIMER : This message and any
> > attachments is intended for the sole use of the intended recipient.
> > It may contain confidential information. Any unauthorized use,
> > dissemination or modification is strictly prohibited. If you are not
> > the intended recipient, please notify the sender immediately then
> > delete it from all your systems, and do not copy, use or print.
> > Internet communications are not secure and it is the responsibility
> > of the recipient to make sure that it is virus/malicious code exempt.
> >
> > The company/sender cannot be responsible for any unauthorized
> > alterations or modifications made to the contents. If you require
> > any form of confirmation of the contents, please contact the
> > company/sender. The company/sender is not liable for any errors or
> > omissions in the content of this message.
> >
> > -------------------------
> >
> >
> > Links:
> > ------
> > [1]
> > https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_Pand
> > aB
> > oard
> >
> > _______________________________________________
> > General mailing list
> > [email protected]
> > https://lists.tizen.org/listinfo/general
>
> --
> http://anavi.org/
> _______________________________________________
> General mailing list
> [email protected]
> https://lists.tizen.org/listinfo/general
________________________________
Confidentiality Statement / Disclaimer : This message and any attachments is
intended for the sole use of the intended recipient. It may contain
confidential information. Any unauthorized use, dissemination or modification
is strictly prohibited. If you are not the intended recipient, please notify
the sender immediately then delete it from all your systems, and do not copy,
use or print. Internet communications are not secure and it is the
responsibility of the recipient to make sure that it is virus/malicious code
exempt.
The company/sender cannot be responsible for any unauthorized alterations or
modifications made to the contents. If you require any form of confirmation of
the contents, please contact the company/sender. The company/sender is not
liable for any errors or omissions in the content of this message.
________________________________
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
