"Brian S. Julin" wrote:
>
> On Mon, 17 Sep 2001, Sven Garbade wrote:
> > I ask this because under X the vertcal refresh rate is almost 100 Hz,
> > under fbdev only nearly 60 Hz. So I have to figure out, how to configure
> > a framebuffer mode with 1024x768x16 at 100 Hz.
>
> Try this in your /etc/fb.modes file:
>
> mode "1024x768x16-100"
> # D: 110.0 MHz, H: 79.023 kHz, V: 99.78 Hz
> geometry 1024 768 1024 768 16
> timings 9091 280 0 16 0 88 8
> endmode
>
> Then run:
>
> fbset "1024x768x16-100"
Thanks, this do the trick. There was already an appropiated mode with
1024x768-100 in /etc/fb.modes, but it wasn't choosen. How do I make this
as the default one? Maybe but this on top of /etc/fb.modes?
Thanks, Sven
