----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
As you know we have one new AD and another one pending. Should any of you Northwest Coupers need help complying I think I can provide this a lot cheaper than most. If you want to install the fuel brace AD your self with all the proper parts and show up at my hanger with your log books I'll provide inspection and sign-off for say $20.00. If you want me to do it and have all the proper parts on hand how about $50.00 for installation & sign off? This figure would not apply if there were difficulties like hardened unairworthy fuel hoses, wrong braces on hand-etc. In that case $25.00 per hour would apply. When the center section AD is finalized I would expect wing removal & installation to take about 5 hours. I will probably install the inspection openings on my own plane and be in a better position to quote time after I've done this. I will travel to your hanger for gas consumed if I fly there or my hourly rate if I drive. Cheers: Paul NC2273H A & P ================================================================== TO UNSUBSCRIBE go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
