I started the installation from a floopy. The system has an old 3x
panasonic cd-rom /w controller that I had to specify arguments for
during installation. I received this error while booting up, after the
installation. Also note that the system does not load the module for the
cdrom during boot up. I have to insmod the sbpcd module after the system
has booted. It will also not load the driver for the 3com nic. I have to
insmod the driver for that too.
Thanks
JDF
TR Havens wrote:
>
> Are you booting from floppy disks, and do you know if the boot process sees
> the CDROM you are installing from? Just kinda curious....I'm no expert.
>
> Tim
> ----- Original Message -----
> From: "Joshua Flythe" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, February 01, 2000 10:28 AM
> Subject: RH 6.1 boot error
>
> > First, let me thank you for your suggestions about the VPN/router thing
> > that I was asking about.
> > So here's the problem, I loaded rh 6.1 on an old 486, and when I boot up
> > I receive an error on the console while booting. It says:
> >
> > Finding Module Dependencies conf:1 missing argument
> > can't open [FAILED]
> >
> > This is a default install of RH 6.1.
> >
> > Does anyone have an idea of what this error means, or what it relates
> > to?
> > Does anyone know where I would start fixing it?
> >
> > Thanks,
> > JDF
> >
> > **********************************************************
> > To unsubscribe from this list, send mail to
> > [EMAIL PROTECTED] with the following text in the
> > *body* (*not* the subject line) of the letter:
> > unsubscribe gnhlug
> > **********************************************************
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
