Hi John Yes I've ordered it, but it's yet to arrive. As soon as it does I'll hook it up and try it. If it works you might like to follow suit. If it doesn't you may like to save yourself the time and money :>)
The 14mm one I put on the Ace did improve things, so I think I'm on the right track. The question is whether the 12.9mm will over cook things. There is a danger the clutch won't disengage properly. Only one way to find out ! best regards Barry ----- Original Message ----- From: "John Laurenson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 16, 2002 2:41 PM Subject: Re: Advice on a purchase > I totally agree with you Barry.....did you order a new new master? From > what? Part number? I'd like to do the same thing. The clutch on my GTS > operates the same way. You can get used to it and compensate when operating > the clutch, but it would be a lot better if it was more progressive > throughout the hand release and not simply the last little bite of movement. > > John "Hawke" Laurenson, Jr. > http://www.hawkeoiler.com/ > http://clubs.yahoo.com/clubs/longdistanceriders > > > From: Barry Edwards <[EMAIL PROTECTED]> > > > Subject: Re: Advice on a purchase > > > > Not so Henry. The GTS shares the same clutch system as my Thunderace (Exup's > > too I believe). The clutch biting point is right at the end of the travel > > (nothing to do with worn clutch plates). It's just the way the hydraulic > > system has been designed. > > > > On my Thunderace I swapped clutch masters to a 14mm unit that improved > > things. I've a 12.9mm one on order, just to try to get it right. My FJ has a > > perfect clutch. Light sure, but nice and progressive from about 1" out from > > the bar. > > > > I believe the GTS, Ace etc have a mis-match between the clutch cylinders. > > The slave is probably of too small diameter and has excessive travel. My > > clutch is pretty much fully disengaged upon no more than 1" travel, if that. > > That means the rest of the travel is just moving the plates further and > > further apart. The smaller master helps this. > > > > Some may be quite happy with it. But in traffic and manoeuvring I find it a > > pain. I've been riding for years so can adapt to a sensitive clutch, but not > > sure if it's ideal to learn with. > > > > > > Barry Edwards
