Excuse me? But do you have a registered SA# Mr? hehe
-----Original Message----- From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf Of Henry S. Winokur Sent: March 30, 2002 6:05 PM To: [EMAIL PROTECTED] Subject: Re: Rear Swingarm Remove/Replace How about jacking it up? > -----Original Message----- > From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf > Of Spee-dee-D > Sent: Saturday, March 30, 2002 6:12 PM > To: [EMAIL PROTECTED] > Subject: Re: Rear Swingarm Remove/Replace > > > You will probably find it MUCH easier to do the next time if you drill a 1 > inch hole in the centerstand bracket (on the exhaust side) so the linkage > bolt can be pulled out without having to take off the sidestand. > Of course > this isn't a problem if you can find another way of suspending your bike > while you work beneath it. > > GWN > Daren > > > -----Original Message----- > From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf > Of R Huggins > Sent: March 30, 2002 11:28 AM > To: [EMAIL PROTECTED] > Subject: Rear Swingarm Remove/Replace > > > Hello, > > Does anyone have experience removing/replacing the rear swingarm? I'm > looking for recommendations on technique, any required "special tools" > and what parts should be replaced (bearings, seals, etc.) > > Thanks! [EMAIL PROTECTED] > >
