Yes I do...I just don't know what it is 'cause its never been assigned!
> -----Original Message-----
> From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf
> Of Spee-dee-D
> Sent: Sunday, March 31, 2002 1:57 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Rear Swingarm Remove/Replace
>
>
> Excuse me? But do you have a registered SA# Mr?
>
> hehe
>
>
> -----Original Message-----
> From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf
> Of Henry S. Winokur
> Sent: March 30, 2002 6:05 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Rear Swingarm Remove/Replace
>
>
> How about jacking it up?
>
> > -----Original Message-----
> > From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf
> > Of Spee-dee-D
> > Sent: Saturday, March 30, 2002 6:12 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: Rear Swingarm Remove/Replace
> >
> >
> > You will probably find it MUCH easier to do the next time if
> you drill a 1
> > inch hole in the centerstand bracket (on the exhaust side) so
> the linkage
> > bolt can be pulled out without having to take off the sidestand.
> > Of course
> > this isn't a problem if you can find another way of suspending your bike
> > while you work beneath it.
> >
> > GWN
> > Daren
> >
> >
> > -----Original Message-----
> > From: GTS-1000 Owners List [mailto:[EMAIL PROTECTED]]On Behalf
> > Of R Huggins
> > Sent: March 30, 2002 11:28 AM
> > To: [EMAIL PROTECTED]
> > Subject: Rear Swingarm Remove/Replace
> >
> >
> > Hello,
> >
> > Does anyone have experience removing/replacing the rear swingarm? I'm
> > looking for recommendations on technique, any required "special tools"
> > and what parts should be replaced (bearings, seals, etc.)
> >
> > Thanks! [EMAIL PROTECTED]
> >
> >
>
>
