Hello,
When you connect the XT to your computer with an SD card inserted, the XT
and the SD card will show up as two separate drives. The SD card will be
listed as a removable disk. For instance, if your XT is drive E, look and
see if you have a Removable Disk (F) listed. If so, this is probably your SD
card.
Once you complete the upgrade, you can reconnect the BookSense to your
computer and delete the update file from the card.
HTH
Justin
----- Original Message -----
From: "Karly Prinds" <[email protected]>
To: "BookSense" <[email protected]>
Sent: Saturday, March 27, 2010 10:41 PM
Subject: [GW-Booksense] Updating Firmware
Hi All,
I have a couple questions. I am starting the process of upgrading the
firmware. My first question is, when I down load it and then have to find
the drive of the sd card, is it the same drive as the booksense...drive e?
When I plug in my booksense with or without the sd card in it since I have
the XT I just see that it is drive e? Is this correct? I don't see an
extra drive when the sd card is connected, is this normal?
Also, it says that after I disconnect the booksense I need to plug it into
the AC adapter and do the actual upgrade. Now, do I just disconnect the
SD
card after the firmware is completely upgraded?
Thanks for all your help.
Karly
If you reply to this message it will be delivered to the original sender
only. If your reply would benefit others on the list andyour message is
related to GW Micro or the BookSense, then please consider sending your
message to [email protected] so the entire list will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list andyour message is related to GW
Micro or the BookSense, then please consider sending your message to
[email protected] so the entire list will receive it.
To manage your subscription to gw-booksense, visit:
http://www.gwmicro.com/listserv
