Curtis, I've seen other situations where WE will go silent if there's a high data transfer going on over the internet. I guess windows must use a lot of resources when handling a high data rate over the net; and so, I'd guess MJ is probably the problem in your case (especially so if you have an older, slower, pc).
Maybe GW could do something by giving the various parts of WE a higher relative priority, I don't know, but until then I'd say you are going to have to arrange things as you suggest and not make long distance calls while using the web. maybe if this is an older pc, you could get a new pc for your use, and dedicate this one to MJ? good luck, Chip -----Original Message----- From: Curtis Delzer [mailto:[email protected]] Sent: Sunday, June 20, 2010 2:37 PM To: Chip Orange Cc: Window-Eyes discussion list Subject: RE: no dice. Hi, I found the solution, and it wasn't maximizing the window for the manual, etc. because the problem was also Internet Explorer 8, but a suggestion, helped, and that this seems to happen when I am running Magic Jack, which I also have, and while it is plugged in, Window-Eyes will not work with Internet Explorer 8 or, even read it's own manual. If I unplug Magic Jack, all seems to be as it should be, or as it is with Window-Eyes. I sure wonder ... why now? when this didn't happen before at all, not a glimmer, what has changed, why, who did the changing, Window-Eyes or the MJ software which runs their dongle, or whatever that device is called, and why now perversely affect Window-Eyes in such a strange area. All other suggestions did nothing, and I did go so far as re-installing Window-Eyes. I truly thank the person making the suggestion, greatly, now the question arises, what do I do now, compromise the use of my long distance calls for my screen reader, or only make long distance calls when I am not planning to use the web with my screen reader. Anyone at GW-Micro have a magic jack and willing to plug in and test, it's just $20 for a year of free long distance, unlimited, $20 for the device and $19.95 for the service, so to update the service is just $19.95 per year. Curtis Delzer. HS. on Sunday 6/20/2010 11:43 AM, Chip Orange said: >and of course, make sure the window for the manual is maximized; this >does make a big difference, and if you were counting on some macro to >do this for you before, maybe it's not being done now. > >Chip > > >-----Original Message----- >From: Curtis Delzer [mailto:[email protected]] >Sent: Sunday, June 20, 2010 4:54 AM >To: Window-Eyes discussion list >Subject: no dice. > >Hi. >Remember a couple days ago I said that Window-Eyes stops speaking with >IE and my only solution was, after trying many others, was to >re-install Window-Eyes? I did, and guess what, no cigar, in fact, >Window-Eyes will not speak it's own manual after f6 is pressed. I arrow >to anywhere in the table of contents, press enter to select it, then >press f6 and nothing at all. I must press alt-f4 to unload that >"browser" window and even then Window-Eyes does not speak. No scripts >are loaded, in fact the default 6 are all that is left from my initial >install of my brand new copy of Window-Eyes. Now, what do I do? >FireFox is my browser, not so much of choice is that it is the only one >that will work with Window-Eyes, but this business of f6 not reading the WE manual is strange. >I would appreciate any suggestions, so until I can use IE again with >Window-Eyes, I must use jfw 11 because it works fine. >I wonder why? > >If you reply to this message it will be delivered to the original >sender only. If your reply would benefit others on the list and your >message is related to GW Micro, then please consider sending your >message to [email protected] so the entire list will receive it. > >GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can >manage your list subscription at http://www.gwmicro.com/listserv. >If you reply to this message it will be delivered to the original >sender only. If your reply would benefit others on the list and your >message is related to GW Micro, then please consider sending your >message to [email protected] so the entire list will receive it. > >GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can >manage your list subscription at http://www.gwmicro.com/listserv. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
