*blasted* Now I see it, thanks!!! /me goes back to sleep, as now the day is done.
Seriously, this permanent exercise at seeing and reseeing common panels is quite an experience. "Just four cuts." At most, four more cuts. Brilliant! Thanks! Lucas El 07/08/2012 09:17, "Gavin Harkness" <[email protected]> escribió: > Sorry for the confusion, I should learn more sketchup to show the details > more clearly. The design originates from my prospecting a 1/4 sized H13 > model and visualising a normal 2400x1200 sheet as four sheets. I soon > realised that if I had two H13 doors on either end, there would be only one > roof joint. > > The side walls (S) are 1/4 of a sheet (1200x600), two ends (E) are then > cut from the remaining 1800x1200 sheet. The roof (R) can remain uncut, or > if you think windage is a problem, chop them off and use them as a ground > insulation inside, or if you want to give the door some protection from the > elements, cut off two triangles from the rear and add them to the front. I > say, "Horses for courses." > > I've attached a quick image of the panel cuts. I hope this helps. > > > > On Tuesday, August 7, 2012 8:38:59 AM UTC+1, LucasG wrote: >> >> Ok, starting to see here. Over at the "H13 plywood" page at appropedia, >> each panel and triangle is named, so let me give that a try. >> >> The H4 has, if I understand correctly, at most 10 pieces: 2 roofs (R), 4 >> end walls (E), and 4 small triangles for the 2 side walls (S). Each R is a >> full panel minus 2 small triangles. Each E is a big triangle (a panel cut >> thru the diagonal) minus a small triangle (S). >> >> I think the third variant of the H4 (does it have a non-normalised name?) >> stands best to wind, no? >> >> This is huge. Thanks! >> >> Lucas >> El 07/08/2012 08:18, "Gavin Harkness" <[email protected]> escribió: >> >>> If those triangles are from the roof panels, well there is no real need >>> to cut them off, if you don't want to (middle model). Another option is to >>> cut of just one end of the shelter's roof triangles and add them to the >>> other end, to make a small awning (left model). >>> >>> On Monday, August 6, 2012 8:40:21 PM UTC+1, LucasG wrote: >>>> >>>> Maybe part of the build van be made *inside* a bigger one that's >>>> already built? >>>> >>>> I've done a paper model (can't see skp from phone) and I end up with 4 >>>> unused small triangles. Also, I make more cuts than described. ??? >>>> >>>> So, if someone could do a flat model of the cuts, I'd really really >>>> appreciate it - I'm just very slow at understanding 3D. >>>> >>>> Looks like the family of *shapes* can't grow much more (devilish grin). >>>> For plywood, I wonder what the solution space is for *joints*. >>>> >>>> The landscape looks good! >>>> >>>> Lucas >>>> El 06/08/2012 12:20, "Vinay Gupta (Hexayurt Shelter Project)" < >>>> [email protected]> escribió: >>>> >>>>> Absolutely lovely piece of work, Gavin. Absolutely lovely. I think >>>>> this would make an *excellent* first build hexayurt for people going >>>>> to Burning Man with a hexayurt for the first time. Not a ton of space, >>>>> but *so incredibly easy to build* because it doesn't have the complex >>>>> taping of the roof cone, which can be a challenge for first timers. >>>>> >>>>> Great work. >>>>> >>>>> Vinay >>>>> >>>>> On Mon, Aug 6, 2012 at 12:14 PM, Gavin Harkness <[email protected]> >>>>> wrote: >>>>> > Hi, >>>>> > >>>>> > I'm new to this group, but I've been follow the hexayurt website for >>>>> several >>>>> > years, dreaming of any opportunity to build one. >>>>> > >>>>> > I've attached a small contribution to the great work people are >>>>> doing here. >>>>> > It's a Google sketchup design for a 2 people hexayurt, made from 4 >>>>> sheets of >>>>> > 8x4, and can be built with as little as 4 cuts. >>>>> > >>>>> > It stands 1.2m high, 2.4m long and just under 2.1m wide. Two end >>>>> panels and >>>>> > one side panel is cut from a single sheet and the roof, in it's >>>>> simplest >>>>> > form, doesn't require any cutting at all. >>>>> > >>>>> > If you have any questions, please ask. >>>>> > >>>>> > -- >>>>> > You received this message because you are subscribed to the Google >>>>> Groups >>>>> > "hexayurt" group. >>>>> > To view this discussion on the web visit >>>>> > https://groups.google.com/d/**ms**g/hexayurt/-/svOZ7l70piwJ<https://groups.google.com/d/msg/hexayurt/-/svOZ7l70piwJ> >>>>> . >>>>> > To post to this group, send email to [email protected]. >>>>> > To unsubscribe from this group, send email to >>>>> > hexayurt+unsubscribe@**googlegro**ups.com<hexayurt%[email protected]> >>>>> . >>>>> > For more options, visit this group at >>>>> > http://groups.google.com/**group**/hexayurt?hl=en<http://groups.google.com/group/hexayurt?hl=en> >>>>> . >>>>> >>>>> >>>>> >>>>> -- >>>>> Vinay Gupta >>>>> Free Science and Engineering in the Global Public Interest >>>>> >>>>> http://bit.ly/gupta_arc - the Gupta State Failure Management Archive >>>>> http://bit.ly/gupta_ark - or see it directly on Archive.org >>>>> >>>>> http://hexayurt.com - free/open next generation human sheltering >>>>> http://hexayurt.com/plan - the whole systems, big picture vision >>>>> >>>>> "In the midst of winter, I finally learned that there was in me an >>>>> invincible summer" - Albert Camus >>>>> >>>>> Twitter/Skype/Gizmo/Gtalk/AIM: hexayurt >>>>> UK Cell : +44 (0) 7500 895568 / USA VOIP (+1) 775-743-1851 >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "hexayurt" group. >>>>> To post to this group, send email to [email protected]. >>>>> To unsubscribe from this group, send email to hexayurt+unsubscribe@** >>>>> googlegro**ups.com <hexayurt%[email protected]>. >>>>> For more options, visit this group at http://groups.google.com/**group >>>>> **/hexayurt?hl=en <http://groups.google.com/group/hexayurt?hl=en>. >>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To view this discussion on the web visit https://groups.google.com/d/** >>> msg/hexayurt/-/VVFCRFuLToEJ<https://groups.google.com/d/msg/hexayurt/-/VVFCRFuLToEJ> >>> . >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to hexayurt+unsubscribe@** >>> googlegroups.com <hexayurt%[email protected]>. >>> For more options, visit this group at http://groups.google.com/** >>> group/hexayurt?hl=en <http://groups.google.com/group/hexayurt?hl=en>. >>> >> > On Tuesday, August 7, 2012 8:38:59 AM UTC+1, LucasG wrote: >> >> Ok, starting to see here. Over at the "H13 plywood" page at appropedia, >> each panel and triangle is named, so let me give that a try. >> >> The H4 has, if I understand correctly, at most 10 pieces: 2 roofs (R), 4 >> end walls (E), and 4 small triangles for the 2 side walls (S). Each R is a >> full panel minus 2 small triangles. Each E is a big triangle (a panel cut >> thru the diagonal) minus a small triangle (S). >> >> I think the third variant of the H4 (does it have a non-normalised name?) >> stands best to wind, no? >> >> This is huge. Thanks! >> >> Lucas >> El 07/08/2012 08:18, "Gavin Harkness" <[email protected]> escribió: >> >>> If those triangles are from the roof panels, well there is no real need >>> to cut them off, if you don't want to (middle model). Another option is to >>> cut of just one end of the shelter's roof triangles and add them to the >>> other end, to make a small awning (left model). >>> >>> On Monday, August 6, 2012 8:40:21 PM UTC+1, LucasG wrote: >>>> >>>> Maybe part of the build van be made *inside* a bigger one that's >>>> already built? >>>> >>>> I've done a paper model (can't see skp from phone) and I end up with 4 >>>> unused small triangles. Also, I make more cuts than described. ??? >>>> >>>> So, if someone could do a flat model of the cuts, I'd really really >>>> appreciate it - I'm just very slow at understanding 3D. >>>> >>>> Looks like the family of *shapes* can't grow much more (devilish grin). >>>> For plywood, I wonder what the solution space is for *joints*. >>>> >>>> The landscape looks good! >>>> >>>> Lucas >>>> El 06/08/2012 12:20, "Vinay Gupta (Hexayurt Shelter Project)" < >>>> [email protected]> escribió: >>>> >>>>> Absolutely lovely piece of work, Gavin. Absolutely lovely. I think >>>>> this would make an *excellent* first build hexayurt for people going >>>>> to Burning Man with a hexayurt for the first time. Not a ton of space, >>>>> but *so incredibly easy to build* because it doesn't have the complex >>>>> taping of the roof cone, which can be a challenge for first timers. >>>>> >>>>> Great work. >>>>> >>>>> Vinay >>>>> >>>>> On Mon, Aug 6, 2012 at 12:14 PM, Gavin Harkness <[email protected]> >>>>> wrote: >>>>> > Hi, >>>>> > >>>>> > I'm new to this group, but I've been follow the hexayurt website for >>>>> several >>>>> > years, dreaming of any opportunity to build one. >>>>> > >>>>> > I've attached a small contribution to the great work people are >>>>> doing here. >>>>> > It's a Google sketchup design for a 2 people hexayurt, made from 4 >>>>> sheets of >>>>> > 8x4, and can be built with as little as 4 cuts. >>>>> > >>>>> > It stands 1.2m high, 2.4m long and just under 2.1m wide. Two end >>>>> panels and >>>>> > one side panel is cut from a single sheet and the roof, in it's >>>>> simplest >>>>> > form, doesn't require any cutting at all. >>>>> > >>>>> > If you have any questions, please ask. >>>>> > >>>>> > -- >>>>> > You received this message because you are subscribed to the Google >>>>> Groups >>>>> > "hexayurt" group. >>>>> > To view this discussion on the web visit >>>>> > https://groups.google.com/d/**ms**g/hexayurt/-/svOZ7l70piwJ<https://groups.google.com/d/msg/hexayurt/-/svOZ7l70piwJ> >>>>> . >>>>> > To post to this group, send email to [email protected]. >>>>> > To unsubscribe from this group, send email to >>>>> > hexayurt+unsubscribe@**googlegro**ups.com<hexayurt%[email protected]> >>>>> . >>>>> > For more options, visit this group at >>>>> > http://groups.google.com/**group**/hexayurt?hl=en<http://groups.google.com/group/hexayurt?hl=en> >>>>> . >>>>> >>>>> >>>>> >>>>> -- >>>>> Vinay Gupta >>>>> Free Science and Engineering in the Global Public Interest >>>>> >>>>> http://bit.ly/gupta_arc - the Gupta State Failure Management Archive >>>>> http://bit.ly/gupta_ark - or see it directly on Archive.org >>>>> >>>>> http://hexayurt.com - free/open next generation human sheltering >>>>> http://hexayurt.com/plan - the whole systems, big picture vision >>>>> >>>>> "In the midst of winter, I finally learned that there was in me an >>>>> invincible summer" - Albert Camus >>>>> >>>>> Twitter/Skype/Gizmo/Gtalk/AIM: hexayurt >>>>> UK Cell : +44 (0) 7500 895568 / USA VOIP (+1) 775-743-1851 >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "hexayurt" group. >>>>> To post to this group, send email to [email protected]. >>>>> To unsubscribe from this group, send email to hexayurt+unsubscribe@** >>>>> googlegro**ups.com <hexayurt%[email protected]>. >>>>> For more options, visit this group at http://groups.google.com/**group >>>>> **/hexayurt?hl=en <http://groups.google.com/group/hexayurt?hl=en>. >>>>> >>>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To view this discussion on the web visit https://groups.google.com/d/** >>> msg/hexayurt/-/VVFCRFuLToEJ<https://groups.google.com/d/msg/hexayurt/-/VVFCRFuLToEJ> >>> . >>> To post to this group, send email to [email protected]. >>> To unsubscribe from this group, send email to hexayurt+unsubscribe@** >>> googlegroups.com <hexayurt%[email protected]>. >>> For more options, visit this group at http://groups.google.com/** >>> group/hexayurt?hl=en <http://groups.google.com/group/hexayurt?hl=en>. >>> >> -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/hexayurt/-/kBtGczdIeVEJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/hexayurt?hl=en. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/hexayurt?hl=en.
