Look for "danger hinges" I believe it is referenced more than once there.
Percival On Jun 28, 2017 16:34, "ken winston caine" <ken.winston.ca...@gmail.com> wrote: > Am getting ready to cut my 4" thick polyiso for an H18. > > Vaguely recall seeing instructions somewhere in the last 10 years for > which angles to cut on which edges so that the walls fit together flush, so > the roof panels fit together flush, and so the bottom edge of the roof and > the "toprail" of the walls fit together flush. Not finding where those > angles are published now. > > Can anyone point me to those? > > Thank you. > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at https://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.