60 degree bevel for wall panels. 30 degree bevels for where roof section meets wall panels.
On Thu, Jun 29, 2017 at 7:53 AM, ken winston caine < ken.winston.ca...@gmail.com> wrote: > What I'm talking about may also be referred to as "beveling" the edges. To > what angle do I bevel what edges so things fit flush and so the structure > has the greatest strength and integrity? > > That's the first thing I noticed that I should clarify when I began > searching "danger hinges." > > Will have to continue the search and sorting later. > > > On Wednesday, June 28, 2017 at 2:58:49 PM UTC-6, Lord Percival wrote: >> >> Look for "danger hinges" I believe it is referenced more than once there. >> >> Percival >> >> On Jun 28, 2017 16:34, "ken winston caine" <ken.wins...@gmail.com> wrote: >> >>> Am getting ready to cut my 4" thick polyiso for an H18. >>> >>> Vaguely recall seeing instructions somewhere in the last 10 years for >>> which angles to cut on which edges so that the walls fit together flush, so >>> the roof panels fit together flush, and so the bottom edge of the roof and >>> the "toprail" of the walls fit together flush. Not finding where those >>> angles are published now. >>> >>> Can anyone point me to those? >>> >>> Thank you. >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to hexayurt+u...@googlegroups.com. >>> To post to this group, send email to hexa...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/hexayurt. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at https://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
