You already answered the angle where the roof meets the walls. Didn't mean to repeat that question. So the bevels where the long edges of the triangle panels meet on the roof. What would those be?
On Wednesday, June 28, 2017 at 5:31:41 PM UTC-6, ken winston caine wrote: > > So, D.V. Rogers, for the 60-degree bevel on wall panels, would I cut a 60 > degree bevel on each of two facing panels' edges, or 30 degrees on each? > (And I will extrapolate the roof bevel cuts from that answer.) > > Thanks. > > And then... where the roof meets the top of the walls. What bevel to cut > on the edge of the roof panels and what bevel to cut on the top edge of the > walls? > > > > On Wednesday, June 28, 2017 at 4:55:59 PM UTC-6, D.V.Rogers wrote: >> >> 60 degree bevel for wall panels. >> 30 degree bevels for where roof section meets wall panels. >> >> On Thu, Jun 29, 2017 at 7:53 AM, ken winston caine <ken.wins...@gmail.com >> > wrote: >> >>> What I'm talking about may also be referred to as "beveling" the edges. >>> To what angle do I bevel what edges so things fit flush and so the >>> structure has the greatest strength and integrity? >>> >>> That's the first thing I noticed that I should clarify when I began >>> searching "danger hinges." >>> >>> Will have to continue the search and sorting later. >>> >>> >>> On Wednesday, June 28, 2017 at 2:58:49 PM UTC-6, Lord Percival wrote: >>>> >>>> Look for "danger hinges" I believe it is referenced more than once >>>> there. >>>> >>>> Percival >>>> >>>> On Jun 28, 2017 16:34, "ken winston caine" <ken.wins...@gmail.com> >>>> wrote: >>>> >>>>> Am getting ready to cut my 4" thick polyiso for an H18. >>>>> >>>>> Vaguely recall seeing instructions somewhere in the last 10 years for >>>>> which angles to cut on which edges so that the walls fit together flush, >>>>> so >>>>> the roof panels fit together flush, and so the bottom edge of the roof >>>>> and >>>>> the "toprail" of the walls fit together flush. Not finding where those >>>>> angles are published now. >>>>> >>>>> Can anyone point me to those? >>>>> >>>>> Thank you. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "hexayurt" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to hexayurt+u...@googlegroups.com. >>>>> To post to this group, send email to hexa...@googlegroups.com. >>>>> Visit this group at https://groups.google.com/group/hexayurt. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "hexayurt" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to hexayurt+u...@googlegroups.com. >>> To post to this group, send email to hexa...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/hexayurt. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at https://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.
