Did we discuss your setup on this list before?  Or was that someone else?

There is no reason why your packet traffic to your server from your client
should need to traverse your provider's network, period.

Please let me help you optimize your personal network.

First, tell me what your exact network configuration is on the inside of the
cable modem.  I.e. do you have a router?  2 NICs in the server or 1?  Are
you NATing?  What OS is on the server?

With a few minor easy changes, I'll have your client connecting to the
external IP of the HLDS server and you be in ping heaven again.

StanTheMan
TheHardwareFreak
www.hardwarefreak.devastation.cc
[EMAIL PROTECTED]

> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, October 06, 2001 6:27 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Cable connections
>
>
>
> I know, I know....
>
> My server is in the next room, and if I ping it via it's
> internal IP, it
> pings at about 10 ms. The point I was trying to make is that
> if I ping it
> via it's external IP, the ping has to go through the DSL
> modem, out into
> Qwest Land, and then back again. *That* is the path that
> addes 30-40 ms per
> transit. That is why I can ping other severs and get better
> responces then
> pinging my own server - Qwest DSL adds significant latency,
> and it takes
> longer to hop through the delay to Qwest Land and back
> through the delay
> again, then it takes to go out over the Internet to other
> servers whos ISP
> *doesn't* introduce such latency.
>
> It sux - all of my players automatically pick up 30-40 ms of
> lag because of
> this.  Not that it's that bad in most cases, but border line
> modem players
> just have a bit more lag then they otherwise might have.
>
>
> ----- Original Message -----
> From: "Stan Hoeppner" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, October 06, 2001 3:56 PM
> Subject: RE: Cable connections
>
>
> >
> > > In order to ping
> > > my server, it goes out to qwest and back, and that adds like
> > > 30-40ms out,
> > > and 30-40 ms coming back. Good old qwest.....
> >
> > WTF?  Are you connecting to your server via Ethernet?  Where is your
> server
> > physically located in proximity to you?  Your ping should
> never be above
> 15
> > or 20 if you're connecting to your server via Ethernet.
> >
> > If your server is on the same side of your broadband modem
> as your client,
> > something is definitely wrong with your router/firewall config...
> >
> > StanTheMan
> > TheHardwareFreak
> > www.hardwarefreak.devastation.cc
> > [EMAIL PROTECTED]
> >
> >
> >
>
>


Reply via email to