> "Svensk Ljud & Ljus Produktion" <[EMAIL PROTECTED]> wrote: > > > If you are using a default kernel, its quite usual set to 250Hz .. > > you might benefit then setting it to something higher 600. 800. 1000 > > its quite easy, in /boot/ dir you should have config-2.x.x...... > > -open that with kate and search for "Hz" > > I got this in my FedoraCore6 box .. > > # CONFIG_HZ_100 is not set > > > > # CONFIG_HZ_250 is not set > > > > # CONFIG_HZ_300 is not set > > > > CONFIG_HZ_1000=y > > > > CONFIG_HZ=1000 > > > > Set thouse 2 to something high, if its not allready done .. > > The value of kernel HZ is not configurable at runtime, therefore you > must recompile the kernel and all modules when you change the value of > CONFIG_HZ. > > Also, learn how to quote: > http://www.netmeister.org/news/learn2quote2.html#ss2.3 > > -atj
Thank you guys for all of the excellent suggestions, I'm still looking for a good howto/walk through on recompiling a kernel (I have yet to see one that will work well with a PE1950 running Ubuntu 6.06.1 yet). The stats command always returns about 50 fps, hopefully getting that up to even 250 fps would be a huge help! I'm also cutting three of the servers off, and will try to dedicate the remaining four servers to their own cores while I test the kernel recompiling. Thanks again folks. ~Steve CONFIDENTIALITY NOTICE: This e-mail may contain information that is privileged, confidential or otherwise protected from disclosure. If you are not the intended recipient of this e-mail, please notify the sender immediately by return e-mail, purge it and do not disseminate or copy it. _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds_linux
