Steam support site is wrong. I've asked a VALVe developer with a e-mail a while ago (he confirmed max is 20000), and even did some tests myself, and the MAX is 20000 and not 25000.
cl_cmdrate can be set to your FPS value (100) with no problem. cl_updaterate, yes it depends of the server. Servers with a lot of people, you might get choke with cl_updaterate 100. But if the server is good, it should be fine. 2008/5/20 Kyle <[EMAIL PROTECTED]>: > There is no reason to ever have you're cl_updaterate or cl_cmdrate set to > 100 or 101 for playing on the Internet. Whoever is telling you that > simply > does not know how to configure client/server side settings. > > For all Internet based half life one mods, All you need is the following > settings to run perfectly. > > Rate 25000 <<< this is the max (for Internet) and don't let anyone tell > you any differently. If you don't believe me then go to the steam support > web site and see for yourself. > > Cl_updaterate 50 << best for client playing on the Internet. > > Cl_cmdrate 60 << best for client playing on the Internet. > > > I have been running servers for 4 years now and have tested these settings > and all possible server side settings and have found them to be the best. > > I run my servers at 566 sys_ticrate with sv_maxrate 25000, sv_minrate at > 10000, sv_maxupdaterate 50, sv_minupdaterate 40 > > My servers perform flawlessly with instant hit registration for all > clients. > > With no choke or loss for anyone. > > > YOU MUST REMEMBER THAT having you're cl_updaterate too high when the server > wont allow it or you're rate wont allow it will cause choke and loss. > > > Please for the love of god let this question be answered and done with for > all time. > > > > > This communication and any accompanying document(s) are privileged and > confidential, and are intended for the sole use of the addressee(s). If > you > have received this transmission in error, you are advised that any > disclosure, copying, distribution, or the taking of any action in reliance > upon it is strictly prohibited. If you have received this communication in > error, please return the message via email reply and immediately delete it > from your system. > -------Original Message------- > > From: AnAkIn . > Date: 05/20/08 08:33:23 > To: Half-Life dedicated Linux server mailing list > Subject: Re: [hlds_linux] HL1 Client Problems > > Developer 1 DOESN'T makes you run slower. A lot of people think that, but > not really. > the MORE FPS you have the slower you run, and developer 1 unlock the 100 > FPS > limit, so it gives you more fps (if you have fps_max higher than 100) : > that's why you run slower. It has nothing to do with developer, but just > the > FPS. Between 100 and 90 FPS, 100 will makes you run slower than 90, and it > might be noticeable. > 20,50,66,111 makes you shoot faster (like I said, the more FPS you have the > slower you run, it has nothing to do with those values). > > > > 2008/5/20 Bento de Gier <[EMAIL PROTECTED]>: > > > No i haven't :) I don't know if the guns actually shoot slower but it > just > > feels and looks slower than normal. > > > > -----Oorspronkelijk bericht----- > > Van: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Namens Richard Eid > > Verzonden: dinsdag 20 mei 2008 16:05 > > Aan: Half-Life dedicated Linux server mailing list > > Onderwerp: Re: [hlds_linux] HL1 Client Problems > > > > Do you have developer mode turned on? If so, turn that off. That's been > > known to cause speed issues in the game. > > > > On Tue, May 20, 2008 at 6:48 AM, AnAkIn . <[EMAIL PROTECTED]> wrote: > > > > > Yes, rate is max 20000. > > > > > > cl_updaterate should be 100 if you use ex_interp 0.01 > > > > > > cl_cmdrate should be maximum 100 if you get 100 FPS, it doesn't send > more > > > command packets than FPS. > > > > > > cl_resend has nothing to do with netcode. > > > > > > cl_cmdbackup should stay at 2. > > > > > > cl_rate could be set to 20000 but I doubt it would make a noticeable > > > difference. > > > > > > I don't think you problem is related to netcode settings though...:S > > > > > > The guns shooting slower have probably to do with your FPS. > > > > > > There are some FPS values where you can shoot faster, run faster, etc. > > > > > > Example: > > > > > > Shoot faster (from memory, there are more values) : 20,50,66,111 > > > > > > Higher FPS makes you run slower afaik (no special value) > > > > > > Higher FPS makes you surf faster (surf_ maps) > > > > > > Higher FPS makes you jump slower > > > > > > 2008/5/20 Bento de Gier <[EMAIL PROTECTED]>: > > > > > > > I don't know if this is really a good place to post this but there > are > > a > > > > lot > > > > more techies on here then on the Steam forums J > > > > > > > > > > > > > > > > > > > > > > > > I've been playing CS and CS:CZ for about 4 years now and never had > > really > > > > bad issues with bullet registration etc. but now I have. I have > > problems > > > > with the bullet reg in CS:CZ for ages now (after the big steam > friends > > > > update I think). Let me give you a bit background info: > > > > > > > > > > > > > > > > CS 1.6 runs fine and on a decent (boosted?) server I can play like I > > > > normally would and I'm able to hit people very good. When I switch > over > > > to > > > > CS:CZ the whole game feels like a big sponge. A great percentage of > my > > > > fired > > > > bullets seem not to register while other players kill me with only a > > few > > > > bullets as I can do on CS 1.6. Also my guns appear to shoot slower > than > > > > normal. It's becoming a bloody nightmare as I play CZ competitively. > I > > > have > > > > exactly the same config settings on CZ as I have on CS. > > > > > > > > > > > > > > > > I have an Intel E6850 (Dualcore 2x 3Ghz) with 4 GB of ram and a > GeForce > > > > 8600 > > > > GTS all plumbed into an Asus P5K-E motherboard. My PC is hooked up to > a > > > > Linksys router which is connected to the Dutch DSL network. I have > 3072 > > > > kbit > > > > downloadspeed and 700something kbit upload speed. (I do live ~3 km's > > from > > > > the connection point where all house's are interconnected.) > > > > > > > > > > > > > > > > My netcode settings are: > > > > > > > > Rate 20000 (Everything above 20k is useless so I have been told) > > > > > > > > Cl_updaterate 101 > > > > > > > > Cl_cmdrate 106 > > > > > > > > Ex_interp 0.01 (or 0.1 but that makes no difference to my problem) > > > > > > > > Cl_resend 2 (default) > > > > > > > > Cl_cmdbackup 2 (default) > > > > > > > > Cl_rate 9999 (default) > > > > > > > > > > > > > > > > I normally get a constant 100 fps and sometimes a bit of choke <10. > > > > > > > > > > > > > > > > > > > > > > > > I'm really lost here and don't really don't know what to do about > this > > > > All > > > > suggestions are welcome ;-) > > > > > > > > > > > > > > > > Met vriendelijke groet, > > > > > > > > With Kind Regards, > > > > > > > > > > > > > > > > Bento de Gier > > > > > > > > <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] > > > > > > > > _______________________________________________ > > > > To unsubscribe, edit your list preferences, or view the list > archives, > > > > please visit: > > > > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > > > > > > > _______________________________________________ > > > To unsubscribe, edit your list preferences, or view the list archives, > > > please visit: > > > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > > > > > > > > > > > -- > > -Richard Eid > > _______________________________________________ > > To unsubscribe, edit your list preferences, or view the list archives, > > please visit: > > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > > > > > > _______________________________________________ > > To unsubscribe, edit your list preferences, or view the list archives, > > please visit: > > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > > > _______________________________________________ > To unsubscribe, edit your list preferences, or view the list archives, > please visit: > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > _______________________________________________ > To unsubscribe, edit your list preferences, or view the list archives, > please visit: > http://list.valvesoftware.com/mailman/listinfo/hlds_linux > _______________________________________________ To unsubscribe, edit your list preferences, or view the list archives, please visit: http://list.valvesoftware.com/mailman/listinfo/hlds_linux
